Author Topic: The Looong Mollegabet  (Read 7485 times)

0 Members and 1 Guest are viewing this topic.

Offline Frode

  • Member
  • Posts: 400
The Looong Mollegabet
« on: December 08, 2010, 07:21:16 pm »
Well, here is the bow you have all so graciously been helping me with, lately!  It's 75 1/4" tip to tip, 74" ntn, 30# @ 24", ash.  Working limbs 1 3/4" wide, and lever tips about  5/16" wide.

It's my first go at ash, and it was done about 90% with some kind of blade, be it draw knife, plane, or spokeshave.  Mostly spokeshave, the low angle variety.  A little rasping around the grip, some filing for the nocks, small gouges for the fade reliefs, and sand paper (OK, I got tired a couple of times and broke out the palm sander).

I regard the thing as an experiment, meant to be whittled on, and altered, but, ya gotta take 'em out shooting every now or then, so here goes!
Oh, almost forgot, it has a linen backing, just in case  ;).

Thanks for all the advice and help, and thanks for looking!

Frode

« Last Edit: December 08, 2010, 07:34:23 pm by Frode »
If it doesn't rap the lintel, it might not be a longbow.

Offline half eye

  • Member
  • Posts: 3,300
Re: The Looong Mollegabet
« Reply #1 on: December 08, 2010, 07:26:43 pm »
Very nice Frode.....the bends are "all Mollegabet" and I really like your treatment of the lever fades.....very slick.
rich

Offline Frode

  • Member
  • Posts: 400
Re: The Looong Mollegabet
« Reply #2 on: December 08, 2010, 07:36:37 pm »
Thank you, Sir!
If it doesn't rap the lintel, it might not be a longbow.

Offline Stoker

  • Member
  • Posts: 1,729
Re: The Looong Mollegabet
« Reply #3 on: December 08, 2010, 07:37:44 pm »
Very nice.Molle's are slowly becoming my favorite bow.I got a chunk of Hickory thats calling but after the yew is done.
Thanks leroy
Bacon is food DUCT tape - Cipriano

Offline Frode

  • Member
  • Posts: 400
Re: The Looong Mollegabet
« Reply #4 on: December 08, 2010, 07:42:53 pm »
Thanks, Stoker!  There is something about that style that hooks folks in, isn't there?
If it doesn't rap the lintel, it might not be a longbow.

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: The Looong Mollegabet
« Reply #5 on: December 08, 2010, 07:55:37 pm »
Nice bow, like the man says -typical mollegabet lines,  I like those long thin tips, should shoot well?
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline cracker

  • Member
  • Posts: 3,123
Re: The Looong Mollegabet
« Reply #6 on: December 08, 2010, 08:00:02 pm »
Very cool I like em long just ask Pappy.
If we can't help each other what is the point of being here?

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: The Looong Mollegabet
« Reply #7 on: December 08, 2010, 09:58:55 pm »
very nice Bow...I like the Coped out Fades...nice touch....
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Frode

  • Member
  • Posts: 400
Re: The Looong Mollegabet
« Reply #8 on: December 08, 2010, 11:37:08 pm »
Thank you all for the kind words!
Actually, I just got back in from shooting for an hour and a half or so, and I'm pleased to report that it does indeed shoot well!  Much snappier than I'd have expected for a 30# bow!  I don't know how much of that is the ash, or the thin levers, or  ???, but I'll take it!  And, looking at the pics, it almost looks like the levers are just barely bending?  I don't know if that has an effect, either.
Thanks again!

Frode
If it doesn't rap the lintel, it might not be a longbow.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: The Looong Mollegabet
« Reply #9 on: December 09, 2010, 12:02:33 am »
Well done Frode!  8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Holten101

  • Member
  • Posts: 295
Re: The Looong Mollegabet
« Reply #10 on: December 09, 2010, 04:24:59 am »
Nice bow Frode:-). Fades to the lever are awsome (gotta try that trick out).

30#@24" on a 75" bow, linen backed...now thats keeping it safe;-). I suspect that you can take atleast 6" off each lever and still have margin for some overdraw....excellent idea to make an overbuild Molly as an ongoing project of lever length experimentation (I assume that is what you mean by "whittled on, and altered")....I lurcked on Ken75 thread too, and if I can find a suitable piece of wood ill walk the same parth as you two:-).

Frode...is that danish?

Cheers

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: The Looong Mollegabet
« Reply #11 on: December 09, 2010, 05:15:06 am »
Oh yeah, I love that scoopy lam fade, real piece of art.
Del
Health warning, these posts may contain traces of nut.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: The Looong Mollegabet
« Reply #12 on: December 09, 2010, 07:43:19 am »
Good looking bow,tiller looks great and I will have to say you got her slick,nice work. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: The Looong Mollegabet
« Reply #13 on: December 09, 2010, 09:18:22 am »
Good looking bow! As others have said, I like how you grooved the shoulders--never seen that before. Nice handle design too.
" To be, or not to be"...decisions, decisions, decisions.

Offline Parnell

  • Member
  • Posts: 5,556
Re: The Looong Mollegabet
« Reply #14 on: December 09, 2010, 09:35:11 am »
Very good looking tiller, your handle looks very thin - how wide is it?  Looks comfortable.
1’—>1’