Author Topic: paper backing finish  (Read 3253 times)

0 Members and 1 Guest are viewing this topic.

Offline chuckp

  • Member
  • Posts: 79
paper backing finish
« on: September 07, 2010, 11:45:37 pm »
How do you finish a paper backed bow?
Can I just stain it and then rub in tru-oil?
How about marine varnish?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: paper backing finish
« Reply #1 on: September 08, 2010, 10:55:20 am »
Just like any other backing. I used Tru-Oil and I very rarely dye or stain bows.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline walkabout

  • Member
  • Posts: 192
Re: paper backing finish
« Reply #2 on: September 08, 2010, 04:54:51 pm »
ive stained with some walnut stain then used tung oil, it turned out nice. im sure just about any normal finish will work over it. staining tends to make it look almost like fglass though, some dont like it or the painted look

Offline sailordad

  • Member
  • Posts: 5,045
Re: paper backing finish
« Reply #3 on: September 08, 2010, 07:56:06 pm »
not san expert as i have never used paper as a backing
but iwouldnt think the peper would pick up stain after it was glued on the bow
the glue should seal the paper to prevent stain from taking into the fibers
but i could be talking out of the back side
like i said im no expert on paper backing
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline 4est Trekker

  • Member
  • Posts: 311
Re: paper backing finish
« Reply #4 on: September 08, 2010, 08:32:19 pm »
It'll actually pick up stain/dye pretty heavily.  The pictures above show a backing that was dyed after it was glued on the bow.  Now, if you accidentally get any glue on the backside of the paper, that spot won't pick up stain/dye. 
"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: paper backing finish
« Reply #5 on: September 08, 2010, 11:39:07 pm »
Crayola crayons and Magic Markers?
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline sailordad

  • Member
  • Posts: 5,045
Re: paper backing finish
« Reply #6 on: September 08, 2010, 11:47:47 pm »
It'll actually pick up stain/dye pretty heavily.  The pictures above show a backing that was dyed after it was glued on the bow.  Now, if you accidentally get any glue on the backside of the paper, that spot won't pick up stain/dye. 

so the paper isnt saturated when its applied?
just glued on one side.
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline walkabout

  • Member
  • Posts: 192
Re: paper backing finish
« Reply #7 on: September 09, 2010, 05:19:35 pm »
ive had glue soak through in spots where it was too thickly applied, it wont stain but it also doesnt look good if the rest of the backing is pristine.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: paper backing finish
« Reply #8 on: September 09, 2010, 06:10:19 pm »
Dye the paper before applying it!
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline chuckp

  • Member
  • Posts: 79
Re: paper backing finish
« Reply #9 on: September 09, 2010, 07:13:53 pm »
I stained the paper back and then sealed with marine quality spar varnish. It came out great. I'll have to knock down the shine a bit with steel wool.

Offline oogabogachiefwalkingdeer

  • Member
  • Posts: 18
Re: paper backing finish
« Reply #10 on: September 09, 2010, 08:56:50 pm »
Crayola glue magic marker and a 26 year old hard body school teacher female of course would be a fine backing project.......

 I used tung oil on mine. Mike Smyth