« previous next »
Pages: [1]

Author Topic: Removing holt melt  (Read 1978 times)

0 Members and 1 Guest are viewing this topic.

Offline stringstretcher

  • Member
  • Posts: 1,557
    • Traditionalarcherycommunitysite.com
Removing holt melt
« on: July 27, 2010, 10:42:24 pm »
Has anyone come up with a way to remove holt melt from field points and broadheads once off the arrow?  I have some that is caked in the bottoms and would love to get it all out.  Anyone use some kind of solvent?  If so, what?
Logged

Offline Barrage

  • Member
  • Posts: 414
Re: Removing holt melt
« Reply #1 on: July 27, 2010, 11:14:12 pm »
Heat and a cloth will usually get it.
Logged
Travis

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Removing holt melt
« Reply #2 on: July 28, 2010, 12:18:25 am »
That's what I would do Charlie, heat it and use something to remove it. Maybe even a newly tapered shaft. Then sand paper on a tapered shaft.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline chasing crow

  • Member
  • Posts: 269
Re: Removing holt melt
« Reply #3 on: July 28, 2010, 07:03:38 am »
Like they said.
Logged
We know more than we think we do. Pass your knowledge on to our youth

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Re: Removing holt melt
« Reply #4 on: July 28, 2010, 04:21:55 pm »
heat and one of those cotton balls you use on the ears.
Logged
CESAR

LEGIONNAIRE ARCHERY

Online Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Removing holt melt
« Reply #5 on: July 29, 2010, 08:15:33 am »
I just wipe it off when I put the points on,after I push them on I wipe the left over off while it is still hot.  :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Tsalagi

  • Member
  • Posts: 540
  • Just a bowman...
    • Guerilla Chef Headquarters
Re: Removing holt melt
« Reply #6 on: August 04, 2010, 01:46:02 am »
I use a pair of vise grips to hold the point and lay it on the burner of our stove (it's electric). Then use a q-tip to sop up the melted glue from inside.
Logged
Living a dream...
Pages: [1]
« previous next »