« previous next »
Pages: [1] 2

Author Topic: just an idea  (Read 4239 times)

0 Members and 4 Guests are viewing this topic.

natty

  • Guest
just an idea
« on: July 21, 2010, 10:22:46 pm »
read a post on homemade dowlers that used a block of wood with a sawzall blade clamped to the wood  next to a hole that had been drilled in it.got me to ah thinkin that 2 is better than 1. basicly u drill hole then cut right up to the hole then clamp sawzall blade to wood. u make two blocks like that then screw them one on top of the other with hole lined up to another board with a support block between top and bottom boards. just make sure to leave enough space on middle blade to let shavings out. make sure to drill hole in 3rd board it dont work well with out it ;D. i aint that good at writing so some of this might be confusing ???
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,905
Re: just an idea
« Reply #1 on: July 22, 2010, 12:38:52 am »
I ain't here to read, post pics.   :P
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline sailordad

  • Member
  • Posts: 5,045
Re: just an idea
« Reply #2 on: July 22, 2010, 12:42:41 am »
i dont mind reading ifn i get a pic or two to look at along the way  ::)
sounds like a good idea,but i cant "PICTURE" it on my own  ;D
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

natty

  • Guest
Re: just an idea
« Reply #3 on: July 22, 2010, 10:21:45 pm »
going to try not sure when though
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,905
Re: just an idea
« Reply #4 on: July 22, 2010, 11:47:59 pm »
Seriously, make sure you post some pics when you get a chance.  It sounds interesting.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

natty

  • Guest
Re: just an idea
« Reply #5 on: July 23, 2010, 12:48:03 pm »
i made drawing of device its saved in my files cant figure out how to post. its a 'windows' 'paint' pic
Logged

Offline Mark Anderson

  • Member
  • Posts: 373
  • Mark Anderson Buckie, Scotland
Re: just an idea
« Reply #6 on: July 27, 2010, 06:46:17 pm »
The two blade jig is the way to go especially if you are using hardwood for shafts. The single blade works fine for spruce, Douglas fir and cedar.
The way I do it with two blades is a bit different though. I simply drill a hole the size I want and then Bandsaw just to the edge on either side. Then I clamp a Sawzall blade on each side in a vise (make sure the blades are facing opposite directions- one with teeth up the other down). Then I use a C clamp to secure the top part of the blades. Always use hardwood for the jig, softwood like pine simply leaves you with some friction charring and smokes a lot!!!
Here is a VERY crude drawing of how I do it.
Mark

[attachment deleted by admin]
Logged
"Mommy some guys just don't know how to shoot REAL bows so they have to buy them, probably at Walmart and they have wheels on them."  Caedmon Anderson (4yrs)

Offline Orkraider

  • Member
  • Posts: 159
Re: just an idea
« Reply #7 on: July 27, 2010, 08:47:01 pm »
this post has been driving me nuts; about a month ago, I came across a youtube video showing the exact process. It was fast, slick and effective. It was in russian, but you didn't need to understand the vocals; and the tags for the video used odd terms like pole instead of dowel.

I've tried searching for it several times now, but no luck.

The drawing posted above is just right, tho.

Logged
Riley, Saint Paul, MN

natty

  • Guest
Re: just an idea
« Reply #8 on: July 30, 2010, 04:04:52 pm »
here is my drawing

[attachment deleted by admin]
Logged

Offline andy thomas

  • Member
  • Posts: 142
Re: just an idea
« Reply #9 on: August 15, 2010, 09:19:36 am »
hey commadore or natty can one of you guys post a pic of your set up. thanks guys
Logged

Offline stringstretcher

  • Member
  • Posts: 1,557
    • Traditionalarcherycommunitysite.com
Re: just an idea
« Reply #10 on: August 15, 2010, 09:59:59 am »
Go to you tube and type in,  "I make round stick with sawblade"  It will show you a couple of the jigs.
Logged

Offline andy thomas

  • Member
  • Posts: 142
Re: just an idea
« Reply #11 on: August 16, 2010, 04:29:53 pm »
HOW ABOUT A PIC!!!! ;D ;D ;D ;D
Logged

Offline Mark Anderson

  • Member
  • Posts: 373
  • Mark Anderson Buckie, Scotland
Re: just an idea
« Reply #12 on: August 16, 2010, 05:02:25 pm »
I've got some shafts that I need to turn this week so if I do get a chance to set it up I'll take some pictures.
Mark
Logged
"Mommy some guys just don't know how to shoot REAL bows so they have to buy them, probably at Walmart and they have wheels on them."  Caedmon Anderson (4yrs)

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,899
  • Eddie Parker
Re: just an idea
« Reply #13 on: August 16, 2010, 08:41:53 pm »
 I can figure out how to post a picture easier than drawing all that. ::)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Orkraider

  • Member
  • Posts: 159
Re: just an idea
« Reply #14 on: August 17, 2010, 12:16:20 pm »
that's exactly the video I was looking for.

here it is:  http://www.youtube.com/watch?v=dwDjedeJCZ0&feature=related

That's dude making a dowel with a vise, drill, chunk of wood and a sawblade.

He goes on to do the same thing with a pair of files, a band saw, a hand plane, and some other approaches.

I browsed through some of his other videos, this guy's got some nice techniques and jigs.
Logged
Riley, Saint Paul, MN
Pages: [1] 2
« previous next »