« previous next »
Pages: [1]

Author Topic: glue for oily woods  (Read 3206 times)

0 Members and 1 Guest are viewing this topic.

Offline NTProf

  • Member
  • Posts: 250
glue for oily woods
« on: July 17, 2010, 06:33:01 pm »
What glue have you found works well for putting a backing (bamboo, hickory) on oily woods?
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: glue for oily woods
« Reply #1 on: July 17, 2010, 07:42:09 pm »
I use Urac.
Logged
Gordon

Offline denny

  • Member
  • Posts: 304
    • my site
Re: glue for oily woods
« Reply #2 on: July 17, 2010, 07:56:07 pm »
I use urac 185 . Denny
Logged

Offline NTProf

  • Member
  • Posts: 250
Re: glue for oily woods
« Reply #3 on: July 17, 2010, 09:49:28 pm »
Thanks. Is there any special prep required?
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: glue for oily woods
« Reply #4 on: July 17, 2010, 10:20:06 pm »
Get everything sanded nice and flat, score the surface with toothing or hacksaw blade and then wipe it clean with acetone.
Logged
Gordon

Offline denny

  • Member
  • Posts: 304
    • my site
Re: glue for oily woods
« Reply #5 on: July 17, 2010, 10:54:18 pm »
Oily wood I clean with acetone ( good Quality) acetone, I sometimes scratch up the surface with a saber saw blade in a vise. Most of the time don't do the later. Denny
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: glue for oily woods
« Reply #6 on: July 18, 2010, 12:05:03 am »
Urac is excellent wood to wood glue. I have also use TBIII for hickory and boo backings on oily woods like osage and ipe with good results. I will have to say that Urac is the best.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline NTProf

  • Member
  • Posts: 250
Re: glue for oily woods
« Reply #7 on: July 18, 2010, 10:48:37 am »
Thanks, everyone. I knew I would get the advice I needed here!
Logged
Pages: [1]
« previous next »