« previous next »
Pages: [1]

Author Topic: any better?  (Read 2788 times)

0 Members and 1 Guest are viewing this topic.

Offline recurve shooter

  • Member
  • Posts: 2,325
any better?
« on: May 11, 2010, 10:37:33 pm »
worked on the tiller a little. still not right, but i wanted to see what everyone said. here's a quick pic i took of it.

Logged
lets just shoot it

Offline aero86

  • Member
  • Posts: 1,263
Re: any better?
« Reply #1 on: May 11, 2010, 10:44:33 pm »
looks like left limb needs to bend a bit more mid limb.  then its perfect
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline islandpiper

  • Member
  • Posts: 635
  • "Just one more bow, OK?"
Re: any better?
« Reply #2 on: May 11, 2010, 11:12:37 pm »
You sure make your Grandpa work hard when YOU make a bow.   ;D ;D  piper
Logged

Offline tombo

  • Member
  • Posts: 117
Re: any better?
« Reply #3 on: May 11, 2010, 11:15:21 pm »
What aero86 said.... plus the mid section is still too stiff, I think. Tom
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,597
Re: any better?
« Reply #4 on: May 11, 2010, 11:36:18 pm »
Are you still on a long string? If so, at that draw your reading will be false. Put it on a short string at about 4" brace height then pull it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: any better?
« Reply #5 on: May 12, 2010, 12:47:10 am »
From the picture, it looks like your grandfather's hands are about 6 inch appart pulling down the string.  The striing needs to be pulled from one center point like you would do while shooting the bow.  I believe most folks use like hook in the center of the string to get the tiller close then use a mirror and/or a camera to tweak the tiller with them actually drawing the bow back as they would do when shooting the bow.
Logged
Dave   Richmond, KY
26" draw

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: any better?
« Reply #6 on: May 12, 2010, 12:47:38 am »
yeah i got it up to brace hight. im gunna scrape at it more tomorrow.
Logged
lets just shoot it

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,042
  • if you have to ask you wouldn't understand ,Tenn.
Re: any better?
« Reply #7 on: May 12, 2010, 07:46:29 am »
What Pat said,looks a little stiff right out of the fads, especially the left and the outer 1/3 of the limbs.
See what it looks like on the short string,things sometimes change,also like others have said,pull from the center. Looking good so far.
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: any better?
« Reply #8 on: May 12, 2010, 08:32:38 am »
Rule # 1 is NEVER pull a bow  further than it takes to  expose a problem. Back off on yanking that thing back so far. LOL. 10-14 in should do it. First place to work is at the fades. Get a pencil and mark a big dark line where you want the bending to start and cautiously work  that area. I like the bend to start at the end of the fades. Take 10  scrapes and check the tiller. You can leave  the bow strung for working the fades. On the right limb looks like you have a hinge mid limb. Get more near handle wood  moving and then we can talk about the hinge. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Postman

  • Member
  • Posts: 1,154
Re: any better?
« Reply #9 on: May 12, 2010, 01:32:13 pm »
Listen to Jawge  ;D or you'll get lotsa set. Don't ask me how I know that...
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: any better?
« Reply #10 on: May 13, 2010, 05:16:22 pm »
Quote from: Postman on May 12, 2010, 01:32:13 pm
Listen to Jawge  ;D or you'll get lotsa set. Don't ask me how I know that...

lol. oh i have a good idea. the redoak bow with bout five inches of set in sitting in my shop should give u a clue as to how i know. lol

i just couldnt figure out exactly what i did wrong.
Logged
lets just shoot it
Pages: [1]
« previous next »