« previous next »
Pages: [1]

Author Topic: string nock glue?  (Read 1257 times)

0 Members and 1 Guest are viewing this topic.

Offline Frode

  • Member
  • Posts: 400
string nock glue?
« on: February 15, 2010, 10:15:00 pm »
Hi all,
I've seen some nocks formed on limb tips from cord or sinew here (Nomadic Pirates guava bow comes to mind) and in one of the TBB volumes, and although I imagine hide glue is probably the preferred method for sinew, what would you recommend on a nock formed from wrapped cordage or fiber?
Thanks,
Frode
« Last Edit: February 15, 2010, 10:40:05 pm by Frode »
Logged
If it doesn't rap the lintel, it might not be a longbow.

Offline Gordon

  • Member
  • Posts: 3,299
Re: string nock glue?
« Reply #1 on: February 16, 2010, 02:11:34 am »
I would use Titebond for that.
Logged
Gordon

Offline NOMADIC PIRATE

  • Member
  • Posts: 1,910
Re: string nock glue?
« Reply #2 on: February 16, 2010, 03:20:53 pm »
thinned down TB is what I use, it penetrates nicely in the fibers  ;)
Logged
NORTH SHORE, HAWAII

Offline Frode

  • Member
  • Posts: 400
Re: string nock glue?
« Reply #3 on: February 16, 2010, 04:34:51 pm »
Thanks guys!  I'm getting ready to try this out with some hemp cord, which I've used with TB III for handle wraps with good results, but those weren't under any stress.
Frode
Logged
If it doesn't rap the lintel, it might not be a longbow.
Pages: [1]
« previous next »