Tiller check

[KShip85]

Ok, well I've taken 2 1/8 inches off each tip and scraped and sanded the outer portion of the limbs.  Hand shock seems to have gone down a lot.  Sorry about the picture quality, my wife was on the floor with our nephew when she took it.  I have a better one at home I will post later if need be.  Thanks for the help!

Kip

[woodstick]

that bottom limb looks real stiff, top looks ok.

[KShip85]

Ok, here is a better shot of it.

[skyarrow]

what # is that u are pulling there looks like alot 

[KShip85]

what # is that u are pulling there looks like alot 

Last time on the scale I think it was pulling a little over 100 # at 32 inches.

Kip

[shamus]

bottom third of the lower limb appears a  little stiff.  But that limb looks like is a bit of character so it might be an optical illusion.

[Rich Saffold]

Make sure you have some matching arrows preferably 950gr.+ and 34" long or something like this maybe longer..If it shoots good then the tiller is close, and getting the tips a bit smaller will help make it shoot sweet, and a low weight low stretch string too..

[KShip85]

Well, I need to get some heavy arrows still but I did shoot a few shots with one of my standard target arrows and the hand shock has gone down a lot.  I think I will thin the tips a little more and maybe just do a horn strip overlay instead of solid horn tips.  Any thoughts? 

Kip