Author Topic: Hickory backed Jatoba finally done!  (Read 5317 times)

0 Members and 1 Guest are viewing this topic.

AKmud

  • Guest
Hickory backed Jatoba finally done!
« on: December 12, 2009, 04:02:12 am »
Well, I managed to get through this build with no major malfunctions!  The bow is 70 NTN and somewhere in the 70# range @ 29".  My scale only goes to 50# and that maxed out in the 23-24" range. 

Here are a couple of pics.



[attachment deleted by admin]

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Hickory backed Jatoba finally done!
« Reply #1 on: December 12, 2009, 04:12:44 am »
Beautiful!  -  if you succeed in getting through the tillering without the Jatoba fretting on the belly, than you have a real nice bow that shoots very well! The one my neighbour made looks nicer every time I see it again.
How wide are you at the tips?? Looks like you could gain some performance by narrowing them (don't be afraid...)
Tiller looks good; maybe a bit to bendy at midlimb lower limb!
Frank from Germany...

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Hickory backed Jatoba finally done!
« Reply #2 on: December 12, 2009, 04:17:09 am »
Hi,  It looks mighty good to me.  Ro
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

AKmud

  • Guest
Re: Hickory backed Jatoba finally done!
« Reply #3 on: December 12, 2009, 04:31:13 am »
Thanks guys,

The limbs at their widest are 1 1/4" tapering down to 3/8" tips, the handle is only 1".  I was trying a narrow profile for something different so the limbs are actually fairly thick.  There actually is more working limb in the lower than the upper but they came out within 1/8" at full draw so I left it alone since I needed a heavy bow and didn't want to scrub any more weight.  This is for a swap and I was actually shooting for 75#. 

I learn a little bit more with every bow.  This was fun being my first wood backed bow.  I have enough jatoba and hickory left for two more so I may have to build one for myself!! 

Offline RyanY

  • Member
  • Posts: 1,999
Re: Hickory backed Jatoba finally done!
« Reply #4 on: December 12, 2009, 04:38:30 am »
I love how thin it is. Great job.

Offline adb

  • Member
  • Posts: 5,339
Re: Hickory backed Jatoba finally done!
« Reply #5 on: December 12, 2009, 12:11:53 pm »
Very nicely done! I'm a big fan of jatoba, and I haven't had any problems with frets. Your tips are pretty stiff, but that'll make the bow very fast, and your tiller otherwise looks good.  ;D

Offline PeteC

  • Member
  • Posts: 2,014
Re: Hickory backed Jatoba finally done!
« Reply #6 on: December 12, 2009, 12:21:28 pm »
Looks real nice. Good Job. God Bless
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Hickory backed Jatoba finally done!
« Reply #7 on: December 12, 2009, 01:46:07 pm »
nice bow!  I really like the contrasts in the different woods of the handle riser.  Tiller looks good too!  -josh  :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline zeNBowyer

  • Member
  • Posts: 649
Re: Hickory backed Jatoba finally done!
« Reply #8 on: December 12, 2009, 03:50:34 pm »
Very  nice:)
"There's  something  immoral  about  abandoning  your  own  judgement"
Cowards always run in  packs
Ishi did not become the arrow, I suspect. The arrow became Ishi.

Offline Kegan

  • Member
  • Posts: 2,676
Re: Hickory backed Jatoba finally done!
« Reply #9 on: December 12, 2009, 07:22:21 pm »
Fantastic!!!  I think "giddy" might be an understatement ;)

Offline barebo

  • Member
  • Posts: 364
Re: Hickory backed Jatoba finally done!
« Reply #10 on: December 12, 2009, 08:59:55 pm »
Nice work - I'd be happy with the way that one turned out - great tiller and nice finish work - Sweet !!!!

Offline sulphur

  • Member
  • Posts: 321
Re: Hickory backed Jatoba finally done!
« Reply #11 on: December 12, 2009, 09:48:31 pm »
very nice.  i always found jatoba to be excellent bow wood.  its usually easy to find straight grained boards.  never had a problem with fretting, in fact a rounded belly seemed to work best.  great looking, well tillered bow you got there!!!!  those narrow limbs should be fast.

Offline Keenan

  • Member
  • Posts: 4,824
Re: Hickory backed Jatoba finally done!
« Reply #12 on: December 12, 2009, 09:58:35 pm »
 Very good looking bow. Jatoba can be a very challenging wood. Any flaw in the tiller will result in frets. Congratulations
 Seems like more of a chocolate brown then the Jatoba that I've worked.

AKmud

  • Guest
Re: Hickory backed Jatoba finally done!
« Reply #13 on: December 12, 2009, 10:41:23 pm »
Thanks guys!  I got it on a scale today at Sportsmans Warehouse and it came in right at 70# @ 29"!  I'll shoot a few dozen more arrows through it and get it shipped off (Maybe in time for Christmas Kegan  ;)).  My daughter saw the wood combination and now isn't nearly as satisfied with her Red Oak bow I built for her this spring...  I guess it might be time for a father/daughter build! 

wannabe

  • Guest
Re: Hickory backed Jatoba finally done!
« Reply #14 on: December 13, 2009, 01:52:34 am »
Wow. I wish I could play with it.