Author Topic: my first oldowan chopper  (Read 6443 times)

0 Members and 1 Guest are viewing this topic.

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
my first oldowan chopper
« on: October 05, 2009, 10:50:21 pm »
well i started knapping today and i actually made something its very crude but it would work as a tool :) hope yall like ttyl




sterling

[attachment deleted by admin]
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: my first oldowan chopper
« Reply #1 on: October 05, 2009, 10:58:10 pm »
 That is a nice start. So many artifacts were made like that because they were a funtional tool. That chert will work a lot nicer heat treated, too.  Now, grind, and grind, and when in doubt, grind. ;)
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: my first oldowan chopper
« Reply #2 on: October 05, 2009, 11:01:48 pm »
will work on the  grinding thing thanx again for telling me about it hopefully tomarrow i will have something that looks a little better lol
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: my first oldowan chopper
« Reply #3 on: October 05, 2009, 11:09:48 pm »
 What I was talking about is if you look at the pointy spots on the right side of the preform; those are the platforms you need to grind. you have them isolated and you should be able, with the right angle, to run a few good long flakes. The one closest to the center and near the Steps, you might be able to run it back and take out most of that.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: my first oldowan chopper
« Reply #4 on: October 05, 2009, 11:58:20 pm »
sweet i will try that tomarrow
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: my first oldowan chopper
« Reply #5 on: October 06, 2009, 07:43:23 am »
Skyarrow, Is that materiial a texas tab? Some can be kinda tuff but also good rock because it's already kinda thin versus a round rock. You  are starting a long journey so slow down an enjoy the ride.:>} Your chopper looks as if it will do the job, great start.  I really liked working on the texas tabs after a little experience, my rock dealer used to say just skinnem an notch.:>} Later Bob

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: my first oldowan chopper
« Reply #6 on: October 06, 2009, 10:19:52 am »
i dont know all of the types of rocks here but it is from texas because i live here i found it in the driveway i will ask my sister she is a geologist she will know and i will get back to you ttyl



sterling
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline billy

  • Member
  • Posts: 1,233
Re: my first oldowan chopper
« Reply #7 on: October 06, 2009, 11:39:54 am »
That might be a piece of Pedernales chert at least that's what it looks like to me....I know it comes in that honey color, but it is also found in browns and grays....
Marietta, Georgia

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: my first oldowan chopper
« Reply #8 on: October 06, 2009, 12:48:56 pm »
well my sister sez its chert and we have a butt load of it here where i live the creek bed behind my house is nothing but it all different sizes and colors :) and there are tons of hammer stones in the creek also



sterling
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Newbow

  • Member
  • Posts: 105
Re: my first oldowan chopper
« Reply #9 on: October 06, 2009, 02:30:28 pm »
A "butt load" of it you say?  You'd better dust out the spare room.  Your new 'friends' will be arriving shortly!

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: my first oldowan chopper
« Reply #10 on: October 06, 2009, 04:34:46 pm »
You've got trade goods right there.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: my first oldowan chopper
« Reply #11 on: October 06, 2009, 05:26:41 pm »
well let me gather a few buckets full of rock and post them on trade i will have to do it next week tho i am blacksmithing the  texas rennasaince festival this weekend and will be gone all weekend but when i get back i will gather alot to trade. the creek is about 8 miles long and it has a chert bottom :) if that will give yall any ideas how much is out there lol ttyl



sterling
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: my first oldowan chopper
« Reply #12 on: October 06, 2009, 07:29:24 pm »
Skyarrow , If you got that much texas stuff in your back yard ya better start expecting lots of company. :) Later Bob

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: my first oldowan chopper
« Reply #13 on: October 06, 2009, 08:08:29 pm »
 See? I told you. ;D
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: my first oldowan chopper
« Reply #14 on: October 06, 2009, 11:12:19 pm »
lol that u did Eddie  ;D
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995