Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Osage Harvesting Advice
« previous
next »
Print
Pages: [
1
]
Author
Topic: Osage Harvesting Advice (Read 2278 times)
0 Members and 1 Guest are viewing this topic.
ShinneryOak
Member
Posts: 81
Osage Harvesting Advice
«
on:
September 29, 2009, 12:05:20 pm »
I have access to a huge windrow of Osage on our family place (nearly a mile by 50 yards deep). I have scouted it many times but most is so gnarled and twisted it seems useless. I finally cut the best sapling I could find but when split, it propeller twisted nearly 90 degrees over 4-5 ft. Someone here suggested cutting it in billets and offsetting the twist that way. Finally threw that one out long ago but am going back this weekend. Is it worthwhile to harvest even if it's that twisted? Noticed a recent post about steaming out twists in osage too. Any words of wisdom? I never tried the billet trick but might this time. Would appreciate details about that and steaming.
Logged
Dean Marlow
Member
Posts: 531
Re: Osage Harvesting Advice
«
Reply #1 on:
September 29, 2009, 12:49:05 pm »
I love billets. They are a little more work getting them ready to glue together but are worth it. Why I like billets is you have more uniform growth rings running up the bow blank. You have probably noticed where the growth rings are usually wider towards the but of the log then get narrower running up the log. When you use side by side billets the ring structure will run a little more uniform up the glued up stave. Plus if you are buying your wood they will usually run a little cheaper than a full length stave.
Logged
DanaM
Member
Posts: 9,211
Re: Osage Harvesting Advice
«
Reply #2 on:
September 29, 2009, 01:28:15 pm »
Osage takes heat nicely, its amazing how easily it straightens. I would cut a bunch of the cleanest wood and set it aside to dry
for awhile. Then start making bows
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."
Manistique, MI
ShinneryOak
Member
Posts: 81
Re: Osage Harvesting Advice
«
Reply #3 on:
September 29, 2009, 01:44:49 pm »
Dean. for a twisted stave, would you cut it in half ,then splice those at a different angle at the handle? If so, how do you match the growth rings? DanaM, what point in the process would you try to straighten it-stave, roughed out, etc.
Logged
bcbull
Member
Posts: 541
Re: Osage Harvesting Advice
«
Reply #4 on:
September 29, 2009, 01:59:15 pm »
like dean say s the billetts are great i personally use a z splice but any splice would probly work and a lot of good bow wood is wated cuz a lot of guy s think they gotta have a fulk
l legth stave so my adVise to you cut the good ones u can find start dryin and do not forget to seal the end s soon as you cut em if ya have to heat and bend a bit either befor or after osage takes heat reallly well so no worries there BROCK
Logged
DCM4
Guest
Re: Osage Harvesting Advice
«
Reply #5 on:
September 29, 2009, 02:10:49 pm »
I have the exact same scenario, a 100 year old hedgerow all grown together in the canopy. Keep looking and eveually you'll find a straight tree. If you'll look for one 30 or 40 years old or so more than likely you'll be able to get it out even if you have to cut the top out of the rest. I don't shy away from billet wood, and some twist is not a problem. But with as many trees as you have, you'll find a few good candidates. I've started looked in areas at the edge of the row, or other small stands of timber nearby. Usually if there is an osage hedge row the surrounding country will have some trees in it too.
Logged
Dean Marlow
Member
Posts: 531
Re: Osage Harvesting Advice
«
Reply #6 on:
September 29, 2009, 03:21:15 pm »
Shineryoak look at the end of the log you cut and when you split it the growth rings usually run close to the same in thickness. Now when you split lay the 2 split pieces side by side and the growth rings are just about identical in thickness. Glue those ends together and the rings will be very close in thickness on both pieces on the end you glue together and on the end of the blank also. I hope that answered your question. Dean
Logged
ShinneryOak
Member
Posts: 81
Re: Osage Harvesting Advice
«
Reply #7 on:
September 29, 2009, 04:47:15 pm »
Dean, Thanks, If I'm reading you right, take both sides of a half split log and splice the butt ends together to get enough length. I guess you could do it with quarter splits of a bigger log too.
Logged
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Osage Harvesting Advice