« previous next »
Pages: [1]

Author Topic: Hickory backed Cherry?  (Read 3957 times)

0 Members and 1 Guest are viewing this topic.

Offline J05H

  • Member
  • Posts: 478
Hickory backed Cherry?
« on: September 14, 2009, 07:07:44 am »
What do you guys think?  I have the stuff ordered, and I'm just looking for a little advice. I was thinking of trying a R/D. I ordered the hickory at  1/4" x 2" x 6', and the Cherry at 1/2" x 2" x 6'. How thick should I make the hickory? What weight range could I safely get with a 2" width? Anything I forgot to ask that you guys think I need to know? Let me know. Thanks, Josh
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Hickory backed Cherry?
« Reply #1 on: September 14, 2009, 09:22:18 am »
Many try, some succeed. :) HBC seems to be a sweet -shooting combo if it stays in one piece. Never built one myself, but from what I've seen here over the years, I'd take that hickory down to 1/8" thick or a little thinner and leave everything full length. I wouldn't try for much over 50# or so. Good luck, and maybe somebody with more experience with that combo will chime in soon.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline DanaM

  • Member
  • Posts: 9,211
Re: Hickory backed Cherry?
« Reply #2 on: September 14, 2009, 11:42:39 am »
What Hillbilly siad, I've tried two and failed both times :'(
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline adb

  • Member
  • Posts: 5,339
Re: Hickory backed Cherry?
« Reply #3 on: September 14, 2009, 01:06:45 pm »
I guess I've been lucky. I've done several hickory backed cherry, and a maple backed cherry, and they've all turned out fine. I did keep them all longish (nothing <68" ntn), wide, and low poundage (nothing >45#). All backing strips were 1/8". You must achieve perfect tiller with cherry, with no overstressing or hinges. All the cherry bows I've made had rigid handles with elliptical tiller.
Logged

Offline J05H

  • Member
  • Posts: 478
Re: Hickory backed Cherry?
« Reply #4 on: September 14, 2009, 04:17:26 pm »
Thanks guys. Sounds like maybe I shouldn't have picked cherry for my first R/D. I'll be asking for lots of help during the process.

Logged
If you never have time to do it right, you'll always have time to do it over.

radius

  • Guest
Re: Hickory backed Cherry?
« Reply #5 on: September 14, 2009, 04:22:27 pm »
it's all good, man!  Just don't make this one an r/d...go for straight up longbow, you'll be fine
Logged

Offline J05H

  • Member
  • Posts: 478
Re: Hickory backed Cherry?
« Reply #6 on: September 15, 2009, 01:21:47 am »
I have a set of hickory and maple coming too. Would this be better for an R/D?
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline Tom Leemans

  • Member
  • Posts: 524
Re: Hickory backed Cherry?
« Reply #7 on: September 15, 2009, 09:17:08 am »
That Hickory will need to be pretty thin and if the bow slat is only 1/2" thick to start, you better leave it pretty wide and long. I personally wouldn't even try a R/D.
Logged

Offline snedeker

  • Member
  • Posts: 907
Re: Hickory backed Cherry?
« Reply #8 on: September 15, 2009, 09:34:07 am »
I bet maple backed cherry would be a good combo. The maple would be a little easier on the cherry

Dave
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Hickory backed Cherry?
« Reply #9 on: September 15, 2009, 11:48:00 am »
Maple backed cherry is a good combo, but I wouldn't make it a R/D. If you want a R/D profile, go with bamboo/osage or hickory/ipe, etc.
Logged

Offline J05H

  • Member
  • Posts: 478
Re: Hickory backed Cherry?
« Reply #10 on: September 16, 2009, 01:48:20 am »
Quote from: adb on September 15, 2009, 11:48:00 am
Maple backed cherry is a good combo, but I wouldn't make it a R/D. If you want a R/D profile, go with bamboo/osage or hickory/ipe, etc.

Thanks for the advice. The only problem is that I already ordered the wood. I should have asked these questions first. I would really like to try an R/D but I don't want to break these pieces. Any advice on what I could do with what I have? If I can only get one bow out of all of it, so be it. I could just make a MBC longbow and save the hickory strips for later. What ratio of Maple to Cherry? Thanks for the help.
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline J05H

  • Member
  • Posts: 478
Re: Hickory backed Cherry?
« Reply #11 on: September 16, 2009, 02:00:38 am »
Just had an idea. Would 1/2" total be thick enough for an HBH R/D? The slats are 2" wide.
Logged
If you never have time to do it right, you'll always have time to do it over.

Offline DanaM

  • Member
  • Posts: 9,211
Re: Hickory backed Cherry?
« Reply #12 on: September 16, 2009, 06:58:29 am »
On the HBC I would glue it up in a simple perry reflex style with about 2" of reflex and maybe even make it a D bow but then again I like D bows :)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Hickory backed Cherry?
« Reply #13 on: September 16, 2009, 08:20:21 am »
Make the Hickory less than 1/8" if you can and work the back to a round profile.  If you use Maple then 1/8" thick but still round the back.  Don't glue in a lot of reflex in, perhaps a couple inches at most.  Keep the belly flat and make the width about 1 1/2" or a bit more
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com
Pages: [1]
« previous next »