Author Topic: deflexed stave  (Read 3954 times)

0 Members and 1 Guest are viewing this topic.

Offline tronman

  • Member
  • Posts: 48
deflexed stave
« on: September 09, 2009, 10:22:36 am »
I have a hickory board stave that is naturally deflexed. Do I leave it as and see how things go or do I attempt to straighten to board at some point.

Offline Kegan

  • Member
  • Posts: 2,676
Re: deflexed stave
« Reply #1 on: September 09, 2009, 01:28:24 pm »
If it is in the handle, I would just flip the tips and turn it into a natural R/D bow. If it is in the limbs, I usually try to take as much as I can out while i temper the belly- but I know it will come back.

Offline Dano

  • Member
  • Posts: 1,349
Re: deflexed stave
« Reply #2 on: September 09, 2009, 04:19:56 pm »
If it's a board, turn it over and it's called reflex. ::)
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline sailordad

  • Member
  • Posts: 5,045
Re: deflexed stave
« Reply #3 on: September 09, 2009, 06:18:46 pm »
If it's a board, turn it over and it's called reflex. ::)

thats what i was thinkng,however that would also depend on what the cut of the board is too
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline tronman

  • Member
  • Posts: 48
Re: deflexed stave
« Reply #4 on: September 09, 2009, 07:49:16 pm »
Yea... I thought about flipping it also, but the grain orientation ,I believe, would prevent me from doing this.

radius

  • Guest
Re: deflexed stave
« Reply #5 on: September 09, 2009, 09:10:49 pm »
show us a pic and we'll tell ya

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: deflexed stave
« Reply #6 on: September 09, 2009, 10:36:55 pm »
Dano, my first thought also.  Great minds... ;)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: deflexed stave
« Reply #7 on: September 10, 2009, 07:00:04 am »
Just oil it and put the reflex in it you want. We straighten Hickory all the time with heat. Or flip
if possible. :) Pictures would help. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline tronman

  • Member
  • Posts: 48
Re: deflexed stave
« Reply #8 on: September 10, 2009, 07:12:31 am »
I only have a "primitive 35mm camera". I will see if I can borrow a digital one. Or I could use this opportunity to learn how to straighten a board.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: deflexed stave
« Reply #9 on: September 10, 2009, 09:47:14 am »
That would be what I would do.Oil it down,get some type of form or clamp to a table and heat
and move it slowly to what you want.I get them hot enough to touch but but to hot to hold and
that should be about right.Try to keep the heat moving and not to scorch it. :) Good luck ,let us know on the progress. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good