Author Topic: Osage selfbow finished  (Read 5392 times)

0 Members and 2 Guests are viewing this topic.

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
Osage selfbow finished
« on: August 28, 2009, 11:23:03 pm »
I've finished up an osage selfbow tonight, it's my shortest bow so far, 59" ntn. It came from a split off another stave, i wasn't sure if it would even make a bow when i started. I wanted it to bend throught the handle as much as possible but you can see the big knot in the handle that i wanted to leave a little stiff, there is also a knot in each limb about midway on each. the bow is about 1 and 3/8" wide for the whole length with the last 8 inches tapered to 1/2" nocks. The handle is built up with leather to make it more comfortable. It finished up at 54# @ 28". you can see that there is some twist in the lower limb that i didn't bother straightening, it doesn't torque in your hand though. one strange thing about this bow is that the back had many spots where the back is concave not convex that made it a little tricky to chase a ring. i kept thinking that there was a slight hinge about 6" up from the handle but i think the humps and bumps are tricking me. It looks like it took a little bit of set but the stave had a bit of deflex before i started, at least that my story and i'm sticking to it. Well let me know what you think, thanks, Dan.









45# at 27"

Offline woodstick

  • Member
  • Posts: 899
Re: Osage selfbow finished
« Reply #1 on: August 28, 2009, 11:45:26 pm »
looks good humps bumps and snakes fool my eyes too. but i give u thumbs up.
a drawn bow is a stick 9/10 broken

Offline JustAim

  • Member
  • Posts: 353
Re: Osage selfbow finished
« Reply #2 on: August 28, 2009, 11:58:52 pm »
Looks like you had your work cut out for you on that one. Great Job!  :)

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Osage selfbow finished
« Reply #3 on: August 29, 2009, 12:08:59 am »
Well done with that difficult stave. 8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Osage selfbow finished
« Reply #4 on: August 29, 2009, 12:21:10 am »
looks like that one was a challenge to tiller.   Came out great though.  Good save since you didn't think it was even gonna be a  bow.  I  really like the knot in the bottom of the handle area.  Gives it more character.    ;D    -josh
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline J05H

  • Member
  • Posts: 478
Re: Osage selfbow finished
« Reply #5 on: August 29, 2009, 02:02:50 am »
Looks good to me. Good job. I heard of a good way to check tiller recently. Instead of looking at the limbs, try looking at the spaces between the limbs and the string. If you compare the space under the upper limb with the space under the lower limb, it's easier to see the symmetry or lack of.
If you never have time to do it right, you'll always have time to do it over.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Osage selfbow finished
« Reply #6 on: August 29, 2009, 11:13:29 am »
Looks like you did a good job with a tough piece of wood. I like the way you incorporated the big knot into the handle.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Osage selfbow finished
« Reply #7 on: August 29, 2009, 01:32:05 pm »
Really nice job. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Dano

  • Member
  • Posts: 1,349
Re: Osage selfbow finished
« Reply #8 on: August 29, 2009, 02:19:08 pm »
Nice job Dan, those splinters can be fun.
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Osage selfbow finished
« Reply #9 on: August 30, 2009, 12:36:31 pm »
BOM bookmarked!!
When you're retired, every day is Saturday

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Osage selfbow finished
« Reply #10 on: August 30, 2009, 01:03:44 pm »

I'm in agreement with what has been said...great job with a difficult piece of wood!  :)
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,915
  • if you have to ask you wouldn't understand ,Tenn.
Re: Osage selfbow finished
« Reply #11 on: August 31, 2009, 06:24:39 am »
Very nice job,don't take much Osage to make a bow as you just proved. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline The Gopher

  • Member
  • Posts: 522
  • Aim Small, Miss Small
Re: Osage selfbow finished
« Reply #12 on: August 31, 2009, 02:39:04 pm »
Thanks for the kind words guys, i still consider myself very much a beginner, although this bow seemed much easier to build than some others even though it had a lot more issues to deal with, maybe some things are finally beginning to sink into my sometimes thick skull. On to the next bow(s).
45# at 27"

Offline PeteC

  • Member
  • Posts: 2,004
Re: Osage selfbow finished
« Reply #13 on: August 31, 2009, 09:20:23 pm »
Hey,that looks like most of my boisd'arc, ;). Good job on a challenging piece of wood.  God Bless
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline uwe

  • Member
  • Posts: 615
Re: Osage selfbow finished
« Reply #14 on: September 01, 2009, 03:41:37 pm »
Thats a nice bow!