« previous next »
Pages: [1] 2

Author Topic: well i learned how NOT to cut self nocks in my cane  (Read 5011 times)

0 Members and 2 Guests are viewing this topic.

Offline recurve shooter

  • Member
  • Posts: 2,325
well i learned how NOT to cut self nocks in my cane
« on: August 24, 2009, 09:24:59 am »
i was working on my cane last night, got em good and strait, cut down to just a little longer than the length i need. i started cutting nocks last night. i was useing a thin serrated blade to cut the nock itself, then a piece of sand paper to get the inside of it smooth. well while i was sawing on one i went to far, split the node, and added the 3rd large scar to my right index finger sence july.  :'(

anyway, after that i got a cloths hanger and got it red hot on the stove and burned the nocks in. how do yall do it with out cutting off your fingers?
Logged
lets just shoot it

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: well i learned how NOT to cut self nocks in my cane
« Reply #1 on: August 24, 2009, 09:38:36 am »
  I cut mine on the band saw then clean it up with a file and sand paper.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: well i learned how NOT to cut self nocks in my cane
« Reply #2 on: August 24, 2009, 09:43:34 am »
 i may just wait till this weekend and do that at my grandpa's house. he has all the tools.
Logged
lets just shoot it

Offline scattershot

  • Member
  • Posts: 161
Re: well i learned how NOT to cut self nocks in my cane
« Reply #3 on: August 24, 2009, 11:59:37 am »
I do mine with a hacksaw, then open it up with a chainsaw file.
Logged
"Experience is just a series of non-fatal mistakes"

Offline sailordad

  • Member
  • Posts: 5,045
Re: well i learned how NOT to cut self nocks in my cane
« Reply #4 on: August 24, 2009, 02:04:10 pm »
i either use a hacksaw,or coping saw,or just a piece of rock ifn i am making a truly primitive arrow
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: well i learned how NOT to cut self nocks in my cane
« Reply #5 on: August 24, 2009, 04:48:08 pm »
Saw a slot 3/8" deep and then open it up with a small round file, usually.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: well i learned how NOT to cut self nocks in my cane
« Reply #6 on: August 24, 2009, 11:37:52 pm »
I use a band saw to make the initial slot then fit it to the string with a thin bladed knife and sand paper.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
Re: well i learned how NOT to cut self nocks in my cane
« Reply #7 on: August 24, 2009, 11:56:37 pm »
I wrap mine before I start cutting them to keep them from spliting.. ;)
Logged

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: well i learned how NOT to cut self nocks in my cane
« Reply #8 on: August 25, 2009, 01:03:34 am »
Does anyone drill a hole through the shaft then saw to the hole so it looks like a commercial plastic knock?
Logged
Dave   Richmond, KY
26" draw

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: well i learned how NOT to cut self nocks in my cane
« Reply #9 on: August 25, 2009, 09:19:46 am »
Quote from: hedgeapple on August 25, 2009, 01:03:34 am
Does anyone drill a hole through the shaft then saw to the hole so it looks like a commercial plastic knock?

i have done it with shoot arrows, they worked well, but i dont knowi f it would work with cane or not
Logged
lets just shoot it

Offline n2everythg

  • Member
  • Posts: 792
Re: well i learned how NOT to cut self nocks in my cane
« Reply #10 on: August 25, 2009, 10:36:57 am »
dremmel tools rule if you have one.
Just made 15 nocks on new arrows the other night.
I use a cutting blade to make the first straight cut. It is prob an inch dia and made for cutting wood. then I take a drill blade that is made for taking out grout from tile. It is the perfect diameter for my string with serving. run that through the bottom and widen it a bit.
Then take a sanding drum and shape up the top. finish up with a couple licks of sand paper and you have a knock that snaps on the string and didnt take long at all.

I do each step with all arrows. i.e., cut all depths then drill out all centers etc.
let me know if you need pics of the dremmel extensions. If you have one it works great.
later
wade
Logged
N2
East Coast of Nowhere

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: well i learned how NOT to cut self nocks in my cane
« Reply #11 on: August 25, 2009, 08:24:32 pm »
Quote from: recurve shooter on August 25, 2009, 09:19:46 am
Quote from: hedgeapple on August 25, 2009, 01:03:34 am
Does anyone drill a hole through the shaft then saw to the hole so it looks like a commercial plastic knock?

i have done it with shoot arrows, they worked well, but i dont knowi f it would work with cane or not

I use the drill hole first method with cane arrow,  BUT I glue in a small dowel in the hollow, let it dry a day or so then drill it.  I tape the cane also to help prevent splitting.  I am NO expert on arrow making.  I've made about 6 cane arrows and about 6 dowel arrows.  So, this method might be completely screwy.  It just what I figured out.  haha
« Last Edit: August 26, 2009, 11:50:29 pm by hedgeapple »
Logged
Dave   Richmond, KY
26" draw

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: well i learned how NOT to cut self nocks in my cane
« Reply #12 on: August 25, 2009, 11:24:31 pm »
Quote from: hedgeapple on August 25, 2009, 08:24:32 pm
Quote from: recurve shooter on August 25, 2009, 09:19:46 am
Quote from: hedgeapple on August 25, 2009, 01:03:34 am
Does anyone drill a hole through the shaft then saw to the hole so it looks like a commercial plastic knock?

i have done it with shoot arrows, they worked well, but i dont knowi f it would work with cane or not

I use the drill hole fist method with cane arrow,  BUT I clue in a small dowel in the hollow, let it dry a day or so then drill it.  I tape the cane also to help prevent splitting.  I am NO expert on arrow making.  I've made about 6 cane arrows and about 6 dowel arrows.  So, this method might be completely screwy.  It just what I figured out.  haha

i seen em done like that. might work well, but im to lazy to get the dowels to fit. gunna go with self nocks on the first set and see how they treat me.
Logged
lets just shoot it

Offline PeteC

  • Member
  • Posts: 2,005
Re: well i learned how NOT to cut self nocks in my cane
« Reply #13 on: August 26, 2009, 10:11:35 pm »
I've tried about everything mentioned here,but the best thing I have found bar-none,is a ceramic saw.(It is made in a coping saw type frame).I got mine at lowe's.With this tool you can cut nocks in seconds,and make them look good too. ;)   God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: well i learned how NOT to cut self nocks in my cane
« Reply #14 on: August 27, 2009, 09:23:14 am »
huh. i think you just hit on the one tool that my grandpa aint got for me to pillage.
Logged
lets just shoot it
Pages: [1] 2
« previous next »