« previous next »
Pages: [1] 2

Author Topic: learned an easy way to taper for glue on points!  (Read 4654 times)

0 Members and 1 Guest are viewing this topic.

Offline recurve shooter

  • Member
  • Posts: 2,325
learned an easy way to taper for glue on points!
« on: July 31, 2009, 04:16:51 pm »
hi guys. i broke the point off an arrow and needed to taper it for a blunt for bunnies but didnt have a tool, so i turned on the gass stove, burned the end for a little while, then scraped off the charcoal till i had it about right, then glued it up.

just figured this might make someone's life a little easyer!
Logged
lets just shoot it

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: learned an easy way to taper for glue on points!
« Reply #1 on: July 31, 2009, 09:10:32 pm »
I just use my Belt Sander
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: learned an easy way to taper for glue on points!
« Reply #2 on: July 31, 2009, 10:03:14 pm »
  Belt sander for me, too. I used to use a pencil sharpener.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: learned an easy way to taper for glue on points!
« Reply #3 on: August 01, 2009, 05:17:14 pm »
well im liveing with my mom (i am 16 after all) and i cant even find a hammer around here. much less a sander.  so i had to find something. by the way i cut an inch off of those new arrows i got and they shoot much better now!
Logged
lets just shoot it

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: learned an easy way to taper for glue on points!
« Reply #4 on: August 01, 2009, 09:27:56 pm »
  Trey, scrape it on the sidewalk while you are turning it. About the time your knuckles hit the sidewalk, thats the right angle.  :)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: learned an easy way to taper for glue on points!
« Reply #5 on: August 01, 2009, 09:53:50 pm »
                       Man ....I bet your hands would be a Mess by the end of the first dozen............ :o    ;)     :P
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: learned an easy way to taper for glue on points!
« Reply #6 on: August 01, 2009, 10:17:40 pm »
but you would have cool scars!!

and mullet im glad i know that now. if im ever stranded without a taper tool and run uppon a sidewalk, i can put on my points. ;D
Logged
lets just shoot it

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: learned an easy way to taper for glue on points!
« Reply #7 on: August 02, 2009, 12:07:23 am »
Thats alright...I have enough Scars on Me from the Pavement and Highway Signs...don't need any more...... ;D
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline scattershot

  • Member
  • Posts: 161
Re: learned an easy way to taper for glue on points!
« Reply #8 on: August 02, 2009, 11:24:35 am »
Sounds like it would work. Congrats on your ingenuity.

In the old days, we used to sharpen pencils with a pocket knife. Every 16 yearold fella should have a pocketknife, right?

Anyway, you may find that you have more control over the angle by using a knife.

Good luck!
Logged
"Experience is just a series of non-fatal mistakes"

Offline shikari

  • Member
  • Posts: 167
Re: learned an easy way to taper for glue on points!
« Reply #9 on: August 02, 2009, 11:54:57 am »
have a tile cutter that i glued sand paper to an extra blade and works just like a woodchuck.
Logged

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: learned an easy way to taper for glue on points!
« Reply #10 on: August 02, 2009, 01:42:33 pm »
Quote from: scattershot on August 02, 2009, 11:24:35 am
Sounds like it would work. Congrats on your ingenuity.

In the old days, we used to sharpen pencils with a pocket knife. Every 16 yearold fella should have a pocketknife, right?

Anyway, you may find that you have more control over the angle by using a knife.

Good luck!

only a pocket knife? when i leave my house i have a pocket knife and a neck knife, and when i go fishing or anyhting i have my foraged japanese hunter just in case.
Logged
lets just shoot it

Ian Johnson

  • Guest
Re: learned an easy way to taper for glue on points!
« Reply #11 on: August 02, 2009, 03:37:25 pm »
recurveshooter, dont you have my taper tool?
Logged

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: learned an easy way to taper for glue on points!
« Reply #12 on: August 02, 2009, 03:55:30 pm »
no ian. i left it at my house along with your leather, bowfishing rig, and black powder gun for you to go pick up, which i see never happened.
Logged
lets just shoot it

Ian Johnson

  • Guest
Re: learned an easy way to taper for glue on points!
« Reply #13 on: August 02, 2009, 03:57:13 pm »
i havent had a truck to drive for the last week
Logged

Offline islandpiper

  • Member
  • Posts: 635
  • "Just one more bow, OK?"
Re: learned an easy way to taper for glue on points!
« Reply #14 on: August 10, 2009, 10:55:29 pm »
Trey, bring them in to the shop and do it on either of my belt sanders....or either of the disc sanders.  We can make a little jig that will cut them JUST RIGHT....and i have a hot glue gun too. 

piper
Logged
Pages: [1] 2
« previous next »