First Bow!! Osage

[rileyconcrete]

finally finished my first bow osage z spliced.  Bullsnake backing, bighorn sheep nocks.
60" ntn.  about 60#.

thanks for looking.

tell

[attachment deleted by admin]

[rileyconcrete]

I would like to post more pictures, butit says they are to large and I cant figure out how to make them smaller any suggestions?

thanks again

Tell

[Michael C.]

Can you shrink them down, that one you posted looks close to 185kb which is about 15 kb shy of maximum per post. Unless you want to post however many photos you have in a new post, which is extraneous I would just resize them or you should be able to post them to someplace like flickr or photobucket and link them. That's a nice looking first bow by the way.

[rileyconcrete]

Thanks Michael I figured it out.

Heres more pictures.

[attachment deleted by admin]

[rileyconcrete]

and some more

[attachment deleted by admin]

[Eric Krewson]

You can see by the pictures your limbs don't bend at all in the fades, run dead straight for 8" or so, hing badly, and run pretty straight to the tips. You made a beautiful bow but the tillering is off a bit. You can partially correct the hinges in your limbs but you will loose plenty of poundage in the process.

If you make one of these and use it on your next bow you will have limbs that bend correctly with no hinges.

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=125;t=001047

[n2everythg]

nice job on your first bow.
and good job on the finish.
like that snake skin back.

My first 5 didnt even shoot and looked much worse. 

One other suggestion. you could narrow up your tips a bit also. might make the bow faster and less hand shock.
Or just shoot it and have fun. nothing like the feeling of finishing your first bow that shoots.
good job.

[Pappy]

Nothing like your first shooter,like Eric said it could use a little fine tunning on the tiller but other than that the finish work and skins look great.By the way did you leave the sap wood on that Osage or back it with something ? Congrats.
   Pappy

[OldBow]

This site is for people who post home-made bows and learn from others. Congrats on your first one. Bookmarked, too, for BOM fun.

[smokeu]

Good job on your new bow.. and good suggestions from the gang. I wish i knew how or was confident enough to try a splice.

good Job

Mike

[GregB]

Nice job on your first bow! When you make your next one feel free to post some pics early in the tillering and folks here can give you some suggestions...lot of experienced bow makers here.

[Eric Krewson]

I am glad I made my first bow before the digital age so no one got a look at it. Your first is 10 times better than mine even with the tillering issues.

[rileyconcrete]

Thanks guys!

I knew  there was a bad hinge in the lower limb, and didnt know how to fix it.  should it really bend in the fades? I was kinda going for the D bow look and I thought they were to be Straight for a ways.?.  Yeah I left the sapwood on the bow instead of backing it.  It seems to be ok with it on there.  I didnt know at the time I started that you could take the sapwod off.  But for my first bow I am pretty happy with the outcome.

I have another stave on order, and will post pictures so I can get a little Help on the tiller of the next ones.

Thanks again guys for all the info I really Appreciate it.

Tell

[adb]

If you come acroos a hinge, remember the old addage... remove wood where the limb doesn't bend enough, and leave alone areas that bend too much. In other words, don't take off anymore wood in the area that is hinging, and remove more wood from the flat areas that don't bend. Try and end up with a more even bend, where the entire limb is doing work. This will add to the bow's life, and greatly reduce set. Try and end up with a tiller something like this:

[attachment deleted by admin]

[hedgeapple]

Good job with the snake skins.

Eric, I now own a tillering gizmo