Author Topic: Timo inspired Scottsbluff  (Read 3957 times)

0 Members and 1 Guest are viewing this topic.

Offline FlintWalker

  • Member
  • Posts: 2,577
Timo inspired Scottsbluff
« on: July 04, 2009, 01:56:56 pm »
After looking at all those Scottsbluff points Timo's been posting lately, I decided to try one fer myself.  It's kinda tough getting those big parallel flakes to fall in there just right. I caught myself several times not paying attention to that, so the pattern ain't exactly right.  I guess that just gives me an excuse to try another one. ;D

[attachment deleted by admin]
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline piper

  • Member
  • Posts: 344
Re: Timo inspired Scottsbluff
« Reply #1 on: July 04, 2009, 01:59:44 pm »
Looks very nice to me...

  Curt
It's hard to ride two horses when you only have one ass

                     Western North Carolina

Offline Timo

  • Member
  • Posts: 2,026
Re: Timo inspired Scottsbluff
« Reply #2 on: July 04, 2009, 02:06:29 pm »
Awesome job on that point Shannon, looks ver well done to me.

I think on the base  the end thinning was down early and the end pressure scars were  covered by edge pressure flakes,at least that is what I have seen from authentic points. Looks like you have some good convexity going also. The masters tell me that most scotts were thin in the base tapereing to the thickest part about 1/3rd the way up ,then thinned toward the tip. Them boys from by gone days knew their stuff!

Offline DanaM

  • Member
  • Posts: 9,211
Re: Timo inspired Scottsbluff
« Reply #3 on: July 04, 2009, 02:17:27 pm »
Damn Shannon looks like you've been knapping for many years not months :)

Great point
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

PeteDavis

  • Guest
Re: Timo inspired Scottsbluff
« Reply #4 on: July 04, 2009, 02:23:59 pm »
Killer blade.

PD

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: Timo inspired Scottsbluff
« Reply #5 on: July 04, 2009, 02:27:56 pm »
I'll remember that about the base thinning on the next one. ;)  I don't know if I'm good enough to regulate the thickness as much as the originals though. I'm just happy not to break it.
 Thanks Dana,  I almost have enough pieces to fill a box for you. :)
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline Timo

  • Member
  • Posts: 2,026
Re: Timo inspired Scottsbluff
« Reply #6 on: July 04, 2009, 03:56:56 pm »
What  you mean not good enough? Looks like you are light speed ahead of  us boy!

Offline Jaeger

  • Member
  • Posts: 238
Re: Timo inspired Scottsbluff
« Reply #7 on: July 04, 2009, 04:18:06 pm »
 nice  point!

Offline Bone pile

  • Member
  • Posts: 1,491
Re: Timo inspired Scottsbluff
« Reply #8 on: July 04, 2009, 07:20:14 pm »
very nice,you musta not read the book
Bone pile
Venice Florida

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Timo inspired Scottsbluff
« Reply #9 on: July 05, 2009, 09:29:59 am »
Shannon, that's a killer point.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,899
  • Eddie Parker
Re: Timo inspired Scottsbluff
« Reply #10 on: July 05, 2009, 08:36:06 pm »
 I think Shannon's been sandbagging us. Real nice point, Bud.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline redwasp

  • Member
  • Posts: 222
Re: Timo inspired Scottsbluff
« Reply #11 on: July 05, 2009, 09:03:24 pm »
sweet, looks like some fine work. nice pics too.
If one man can do it, another man can do it. Richard......Northeastern PA.

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Timo inspired Scottsbluff
« Reply #12 on: July 05, 2009, 10:55:29 pm »
Months...you started knapping before you took your first step....c/mon....admit it.... ::) ;D damned nice Point Shannon
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Timo inspired Scottsbluff
« Reply #13 on: July 06, 2009, 12:47:27 am »
Your a machine Shannon! At least it looks like it was milled out by a machine ;D.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: Timo inspired Scottsbluff
« Reply #14 on: July 06, 2009, 10:17:44 am »
 :o  holy holy!!!
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct