« previous next »
Pages: [1]

Author Topic: Help with short HHB bow  (Read 3225 times)

0 Members and 1 Guest are viewing this topic.

Offline oakfall

  • Member
  • Posts: 8
Help with short HHB bow
« on: June 04, 2009, 11:13:12 pm »
I've built several HHB longbows in the 66" range and would like to try my hand at a short one. I'm thinking maybe 60"-62".
What would you guys suggest for limb width if I go for this length?
Thanks,
oak
Logged

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
Re: Help with short HHB bow
« Reply #1 on: June 04, 2009, 11:47:52 pm »
What draw leangth??
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Help with short HHB bow
« Reply #2 on: June 05, 2009, 06:08:55 am »
Draw length and what weight are you looking for. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline oakfall

  • Member
  • Posts: 8
Re: Help with short HHB bow
« Reply #3 on: June 05, 2009, 08:32:21 am »
Sorry, draw length 28" and around 55lbs. Thanks again

oakfall
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Help with short HHB bow
« Reply #4 on: June 05, 2009, 08:39:39 am »
Thats pretty short for a 28 inch draw,but if I was going to try it I would go at least 1 1/2 to 1 5/8
wide at the fads to about mid limb the tapper to 3/8 or so to the tips.I would also probably flip the tip,last 6 inches or so to help with the stacking problem you will get. :) Are you sure you draw 28
most say that but to be honest if you watch people shoot very few really draw that with selfbows.
Just a thought. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline oakfall

  • Member
  • Posts: 8
Re: Help with short HHB bow
« Reply #5 on: June 05, 2009, 08:50:33 am »
Thanks Pappy. You make a good point about draw length. Since turning 60, things have started to shrink up.
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Help with short HHB bow
« Reply #6 on: June 05, 2009, 10:04:33 am »
 ;D ;D ;D ;D I know what you mean. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline woodstick

  • Member
  • Posts: 899
Re: Help with short HHB bow
« Reply #7 on: June 05, 2009, 08:55:34 pm »
hey yall im new here but i made a osage bow 54" 57# at 27" draw backed with rawhide and rattlers shoots good a little stack and hand shock but not as bad as i figured it would be.
Logged
a drawn bow is a stick 9/10 broken

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Help with short HHB bow
« Reply #8 on: June 06, 2009, 08:15:14 am »
How did ou measure your draw length, oakfall? Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

nickf

  • Guest
Re: Help with short HHB bow
« Reply #9 on: June 06, 2009, 11:57:46 am »
if you want a bending handle bow, you can go down to 56" or even below, with a good tiller. 1 1/2" width will be enough for this style. you can go pretty far, even unbacked, as I posted here: http://www.primitivearcher.com/smf/index.php/topic,13317.0.html

55" ntn, 40#@32". Similar stress as a 47" bow with a 28" draw. These shorties are pretty slow though.

Nick
Logged
Pages: [1]
« previous next »