« previous next »
Pages: [1] 2

Author Topic: It was supposed to be a Dovetail  (Read 4352 times)

0 Members and 1 Guest are viewing this topic.

Offline FlintWalker

  • Member
  • Posts: 2,577
It was supposed to be a Dovetail
« on: May 27, 2009, 03:41:27 pm »
I could kick myself in the butt for not looking at some of my authentic Dovetails before I notched this one. >:(  The notches should have been a little more horizontal and would have actually been easier to make. 
Oh well, I'm happy with how it turned out anyway.  It's the biggest piece I've made so far. I used as much percussion as I dared, but still had to resort to a good bit of pressere to clean it up and get it to look like anything. 
  And for anyone wanting to permanently sign your work, a little electric engraver works pretty good. You just have to go slow and let it barely touch the rock. ;) One you get it signed, a dab of wax makes it all but invisible.

[attachment deleted by admin]
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

PeteDavis

  • Guest
Re: It was supposed to be a Dovetail
« Reply #1 on: May 27, 2009, 04:38:37 pm »
Terrific piece!

PD

Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: It was supposed to be a Dovetail
« Reply #2 on: May 27, 2009, 05:12:06 pm »
That's a great looking point, just call it something else....:)
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline matte

  • Member
  • Posts: 19
Re: It was supposed to be a Dovetail
« Reply #3 on: May 27, 2009, 06:48:40 pm »
Nothing wrong with that point. You  should see some of mine,most of mine look terrible next to yours and I have been knapping for years.
Logged

knappy dude

  • Guest
Re: It was supposed to be a Dovetail
« Reply #4 on: May 27, 2009, 07:16:32 pm »
nice looking point ! the least you could do was to break it into about three pieces ,like i do all the time, then you could have three bird points ;D
Logged

Offline DanaM

  • Member
  • Posts: 9,211
Re: It was supposed to be a Dovetail
« Reply #5 on: May 27, 2009, 07:26:41 pm »
Seeing as ya screwed it up just send it up to me and I promise not to tell anyone ;) :D

Great point Shannon :)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Timo

  • Member
  • Posts: 2,026
Re: It was supposed to be a Dovetail
« Reply #6 on: May 27, 2009, 07:29:28 pm »
Very nice Shannon! You can call it what ya want,the base  favors a Hopewell,but there were variances of dovetails,just like most all other point types. Ya done good son.

Texas material?
Logged

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: It was supposed to be a Dovetail
« Reply #7 on: May 27, 2009, 09:27:55 pm »
Thank Ya'll :)
 Barry, don't give me that ::) I know what you can do ;)
 
 Dana, you'll get yours.  I just need to get my hands on some more rock.  Right now I'm down to one more piece. :(

 Your right about the different variations Tim. I hadn't even thought about the Hopewells though. You're right again, it does kinda look like one. That, or a Kirk corner notched.   It's Georgetown chert, I wish I had a ton of it!

 I been doing a little research and have found out that Sonora flint comes from a couple counties west of me.  I plan to do a little driving and see if I can come up with anything. It would be nice if I could, it's really nice looking rock.
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline n2everythg

  • Member
  • Posts: 792
Re: It was supposed to be a Dovetail
« Reply #8 on: May 27, 2009, 09:31:34 pm »
man you are going to town lately. what u doing nothing but nappin"?
Nice point once again!
later
wade
Logged
N2
East Coast of Nowhere

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: It was supposed to be a Dovetail
« Reply #9 on: May 27, 2009, 09:41:40 pm »
  Nice point, Shannon. Down here it would be called a Culbreath.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline redwasp

  • Member
  • Posts: 222
Re: It was supposed to be a Dovetail
« Reply #10 on: May 27, 2009, 10:17:49 pm »
that looks sweet man. what did you engrave that with? I would love to make somthing that pretty. back to the rock pile for me.
Logged
If one man can do it, another man can do it. Richard......Northeastern PA.

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: It was supposed to be a Dovetail
« Reply #11 on: May 27, 2009, 10:40:28 pm »
Shannon- you are knocking out a BUNCH of real beautiful points.  Nice job on that one as well as the others.  Keep 'em coming.
Logged
Traverse City, MI

Offline TRACY

  • Member
  • Posts: 4,523
Re: It was supposed to be a Dovetail
« Reply #12 on: May 28, 2009, 12:06:16 am »
That is a really nice point! Sonora the same or similar as Indiana hornstone?

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: It was supposed to be a Dovetail
« Reply #13 on: May 28, 2009, 12:16:24 am »

Redwasp, I just used a little cheap engraver.

 Thanks Rick ;D

Tracy, I believe it's different.  Most all the points I've seen made from it are blue, grey, brown and sorta reddish mottled. It's very glossy and about all of it has tiny little air pockets in it.   I may never find any of it, but I'm gonna try.
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline hawkbow

  • Member
  • Posts: 2,051
    • High Country Archer
Re: It was supposed to be a Dovetail
« Reply #14 on: May 28, 2009, 12:43:36 am »
very nice work brother, looks like it would take down a mammoth pretty easy.. happy hunting Hawk
Logged
IT IS BETTER TO LOSE WITH HONOR. THAN TO WIN THROUGH DECEPTION...


Mike "Hawk" Huston
Pages: [1] 2
« previous next »