Author Topic: ?? Any Idea on what this is?  (Read 5134 times)

0 Members and 2 Guests are viewing this topic.

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
?? Any Idea on what this is?
« on: April 19, 2009, 09:15:09 pm »
This past weekend I met a guy named Scott.. He had a large old collection of point's and knives.. I think he said they were from TX.. But any way None of us had a clue what kind of point or what kind of material this point is.. Any Ideas??? It's approx. 10"x4"..





Offline FlintWalker

  • Member
  • Posts: 2,577
Re: ?? Any Idea on what this is?
« Reply #1 on: April 19, 2009, 09:25:36 pm »
I would call it a Hoe ???
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline Timo

  • Member
  • Posts: 2,026
Re: ?? Any Idea on what this is?
« Reply #2 on: April 19, 2009, 09:54:58 pm »
interesting piece for sure. Never know, might just be an attempt to be different? Looks well made.

Does look man made .... ;D ;D

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: ?? Any Idea on what this is?
« Reply #3 on: April 19, 2009, 10:40:47 pm »
Cant be sure of material from pic however, looks like an mid archaic knife point  (archeological perspective.  ::) However, dont think its mid archaic looks a lot more recent. Would make a good "hoe" now woulndt it ? ;D.......bob

Offline huntertrapper

  • Member
  • Posts: 1,708
Re: ?? Any Idea on what this is?
« Reply #4 on: April 19, 2009, 11:11:23 pm »
if i read dimensions  correct itd make a good axe
Modern Day Tramp

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: ?? Any Idea on what this is?
« Reply #5 on: April 20, 2009, 05:11:29 am »
how thick is it?
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: ?? Any Idea on what this is?
« Reply #6 on: April 20, 2009, 08:16:13 am »
Never saw anyting exactly like that. Could be an adze or mattock blade? I wouldn't be sure that it's authentic either, it looks kinda like one of those gray ghosts. But you never know, there have been some wierd things found over the years, especially around mounds.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: ?? Any Idea on what this is?
« Reply #7 on: April 20, 2009, 08:49:22 am »
Nice peice! Don't know what it is but looks a lot like that hawk head I was trying to make awhile back - sure that's not what it is. Maybe something ceremonial? Nice knapping - looks really thin for the dimension's given, wow....
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline knightd

  • Member
  • Posts: 1,392
    • www.primalneedarchery.com
Re: ?? Any Idea on what this is?
« Reply #8 on: April 20, 2009, 09:58:34 am »
It was Thin.. I would say 1/4" to 3/8".. The lines in it look like growth rings and the straight line through them look's like it could be the pith line from the center as it does not show on the other side of the piece..

Offline boo

  • Member
  • Posts: 343
Re: ?? Any Idea on what this is?
« Reply #9 on: April 20, 2009, 10:11:24 am »
that was a cool peace for sure, it was also curved like it was warped  ???  and as thin as it was i cant see it being a chopping tool, or at least not for heavy work.
Boo

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: ?? Any Idea on what this is?
« Reply #10 on: April 20, 2009, 10:33:52 am »
the leading edge was worked to be sharp so i would guess an adze . especially with the double notching. what area are you in. being that thin i would imagine it would break easily. evn a sideways glance off a skull could break it.  unless it was used to remove burnt wood like in a dugout
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline n2everythg

  • Member
  • Posts: 792
Re: ?? Any Idea on what this is?
« Reply #11 on: April 20, 2009, 05:04:49 pm »
All the artifacts that steve brought were actually his neighbors.

His Neighbor's Dad collected them and lives down in TX. He didnt have specific locations and dates on any of them though.

Was hoping James would show up and tell us what was what. Maybe he can bring them up to hickory and drag his neighbor along.
N2
East Coast of Nowhere

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,621
  • Sorry Officer, I was just gathering "materials".
Re: ?? Any Idea on what this is?
« Reply #12 on: April 20, 2009, 07:28:09 pm »
Looks like it could be a ceremonial tomahawk.  I think I've seen a couple of similar artifacts but without the notches.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline DanaM

  • Member
  • Posts: 9,211
Re: ?? Any Idea on what this is?
« Reply #13 on: April 20, 2009, 07:39:46 pm »
Looks to me like a Yooper pasty cutter better send to me for safe keeping ;) :D
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline DustinDees

  • Member
  • Posts: 192
  • the kingdom of bahrain, deployed
Re: ?? Any Idea on what this is?
« Reply #14 on: April 22, 2009, 01:50:18 am »
My woman says its a platter. like a turkey plate. heh

Dustin D.
“Do not spoil what you have by desiring what you have not; remember that what you now have was once among the things you only hoped for.” – Epicurus
Put your hand on a hot stove for a minute, and it seems like an hour. Sit with a pretty girl for an hour, and it seems like a minute. That's Relativit