« previous next »
Pages: [1]

Author Topic: Take Down Sleeve Question  (Read 2020 times)

0 Members and 1 Guest are viewing this topic.

Offline Dean Marlow

  • Member
  • Posts: 531
Take Down Sleeve Question
« on: March 08, 2009, 10:12:25 pm »
Guys I am working on my first take down bow. I am ready to glue on the  fittings. What is the best glue that will bond both with the metal and wood. Dean
Logged

Offline islandpiper

  • Member
  • Posts: 635
  • "Just one more bow, OK?"
Re: Take Down Sleeve Question
« Reply #1 on: March 08, 2009, 10:43:40 pm »
Clean metal, fresh clean wood and JB Weld?   opinions?

I have made long lasting repairs to cast iron tool bodies with JB Weld.   If you need to get it off it is real work to do so.     piper
Logged

Offline Timo

  • Member
  • Posts: 2,026
Re: Take Down Sleeve Question
« Reply #2 on: March 08, 2009, 10:59:27 pm »
Dean, they make an epoxy for just that thing I recall? MT13 or something? I think 3 rivers sell it.
Logged

Offline sailordad

  • Member
  • Posts: 5,045
Re: Take Down Sleeve Question
« Reply #3 on: March 08, 2009, 11:00:47 pm »
3m makes a two part epoxy for wood to steel adhesion.
i believe its a 5 min 2 ton epoxy.i have used it for gluing wood to metal,for knife handles
never done a take down yet but i wouldnt be afraid of using it.
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,901
  • if you have to ask you wouldn't understand ,Tenn.
Re: Take Down Sleeve Question
« Reply #4 on: March 09, 2009, 09:28:03 am »
I used expoxy on the last one I did.Just be sure everything fits before you apply it.Then be ready to work pretty fast.I got it a Lowe's I think and came in a syringe with the 2 side by side.
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Mechslasher

  • Member
  • Posts: 1,046
Re: Take Down Sleeve Question
« Reply #5 on: March 09, 2009, 11:39:34 am »
i think any epoxy would work, just be sure you don't glue your sleeve's together or let epoxy run into the sleeve.  that will cause problems later.
Logged
"A liberal is someone who feels a great debt to his fellow man, which debt he proposes to pay off with your money." 

G. Gordon Liddy
Pages: [1]
« previous next »