Author Topic: Tools and Boards Procured!  (Read 2266 times)

0 Members and 1 Guest are viewing this topic.

Westbound

  • Guest
Tools and Boards Procured!
« on: February 04, 2009, 02:00:01 pm »
I just got back from Home Depot with some tools of the trade and 2 Red Oak boards to start out with.

I have yet another question.
One of the boards has beautiful grain, but has a slight curve.  The curve is not side to side.
This is a six foot board, and when laid flat, one end rises 1/2". 
I was thinking of using that as a natural reflex.  Is this a good idea??


Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Tools and Boards Procured!
« Reply #1 on: February 04, 2009, 03:10:22 pm »
If the grain is appropriate using the curve as reflex is OK.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

John B.

  • Guest
Re: Tools and Boards Procured!
« Reply #2 on: February 04, 2009, 05:07:29 pm »
What Pat said, and I'll just point out that you'll almost certainly lose that reflex as soon as you start tillering.

Good Luck, and post pics!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tools and Boards Procured!
« Reply #3 on: February 04, 2009, 05:42:07 pm »
Yes, that's fine. Remember  the importance of grain in board choice. There's info on my site. Jawge
http://georgeandjoni.home.comcast.net/~georgeandjoni/
Set Happens!
If you ain't breakin' you ain't makin!

Westbound

  • Guest
Re: Tools and Boards Procured!
« Reply #4 on: February 04, 2009, 06:23:01 pm »
George,
I haven't just seen your website, I've probably read every word on it  :)
It is a wonderful resource for us beginners.
I went through the entire rack at Home Depot with plans to buy several boards.  There were two out of probably 40 that had good grain.

If I can get my wife to instruct me on her jedi ways of getting pictures from the camera to the computer I'll post up pics as I build  ;D