« previous next »
Pages: [1] 2

Author Topic: Horsebow Questions?  (Read 7934 times)

0 Members and 1 Guest are viewing this topic.

darren1968

  • Guest
Horsebow Questions?
« on: January 14, 2009, 01:01:19 pm »
Does anyone know if its possible to construct a horsebow with only wood laminates for the  limbs (without using fiberglass laminates), then to back them with either Genuine Sinew or Super Sinew as that offered by Bowstick, appling it with either Bowgrip 100 or Smooth On?
Secondly, i`m only guessing but is it correct to assume the thickness of the wood lamination used for the limbs affects the draw weight? If so does one need to tiller the limbs after consruction as is the case for selfbows & flatbows. Or do I need to calculate a given thickness to a given draw weight?
I`m looking for a draw of 55# to 60# @28", I look to use either Ash or Oak laminations as these woods seem readily available here in Romania.
I would be grateful of any ideas you can forward me on this issue
Thanks, Darren.
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Horsebow Questions?
« Reply #1 on: January 14, 2009, 01:32:27 pm »
Absolutely I believe it is possible with wood.  The trick is the wood type. I would use Ipe and real sinew and glue it with hide glue if it were me. Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Horsebow Questions?
« Reply #2 on: January 14, 2009, 03:26:44 pm »
Chris Cade made a "no horn" horn bow a few years ago. I believe he used boo on the belly and real sinew on the back.
  There was an article in an old PA magazine that was about a "hornless" horse bow. Do a search and see what you come up with.     Pat
   
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline james parker

  • Global Moderator
  • Member
  • Posts: 678
    • huntworthyproductions
Re: Horsebow Questions?
« Reply #3 on: January 14, 2009, 06:29:20 pm »
hows this ?im not finished yet but when its done ill post it.all wood boo back and belly

[attachment deleted by admin]
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Horsebow Questions?
« Reply #4 on: January 14, 2009, 06:53:08 pm »
James, I want one of those! ;D buddy, buddy ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Cromm

  • Member
  • Posts: 1,065
Re: Horsebow Questions?
« Reply #5 on: January 14, 2009, 06:53:20 pm »
WOW!!!!!!!!!
Logged
Great Britain.
Home of the Longbowman.

darren1968

  • Guest
Re: Horsebow Questions?
« Reply #6 on: January 14, 2009, 07:56:26 pm »
Nice 1 Robutus!
What`s the draw weight?  What form did you use? I`ve been told by a supplier of materials for making horsebows, that the draw weight depends on the reflex designed into the form?
Logged

Offline james parker

  • Global Moderator
  • Member
  • Posts: 678
    • huntworthyproductions
Re: Horsebow Questions?
« Reply #7 on: January 14, 2009, 08:03:37 pm »
at this time its around 60# @30" but im gonna lighten it up a bit.i didnt use a form just wedges  and a profile templet
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Horsebow Questions?
« Reply #8 on: January 14, 2009, 08:30:17 pm »
That is real cool James. Does it have a wood core?
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline james parker

  • Global Moderator
  • Member
  • Posts: 678
    • huntworthyproductions
Re: Horsebow Questions?
« Reply #9 on: January 14, 2009, 08:44:45 pm »
its got one tapered core two parallels then the boo back and belly,just a little too much bow for its length right now but im working on it
Logged

Offline james parker

  • Global Moderator
  • Member
  • Posts: 678
    • huntworthyproductions
Re: Horsebow Questions?
« Reply #10 on: January 15, 2009, 11:53:01 am »
braced!!

[attachment deleted by admin]
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Horsebow Questions?
« Reply #11 on: January 15, 2009, 11:58:58 am »
That looks wicked, James.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline james parker

  • Global Moderator
  • Member
  • Posts: 678
    • huntworthyproductions
Re: Horsebow Questions?
« Reply #12 on: January 15, 2009, 12:02:16 pm »
thanks steve,not bad for all natural materials
Logged

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: Horsebow Questions?
« Reply #13 on: January 15, 2009, 02:50:02 pm »
wow. cool bow. can you actually hit anything with those? seems like it would be hard.
Logged
lets just shoot it

Offline james parker

  • Global Moderator
  • Member
  • Posts: 678
    • huntworthyproductions
Re: Horsebow Questions?
« Reply #14 on: January 15, 2009, 03:13:48 pm »
the best results  are had while usung a thumb ring,not bragging but im fairly good,better at longer shots than short.
Logged
Pages: [1] 2
« previous next »