« previous next »
Pages: 1 [2] 3 4 ... 9

Author Topic: January Knapping Challenge-Bolen Bevel point  (Read 54100 times)

0 Members and 4 Guests are viewing this topic.

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: January Knapping Challenge
« Reply #15 on: January 14, 2009, 01:36:20 pm »
You bleed less in those temps.  ::) ::) ::)
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline DanaM

  • Member
  • Posts: 9,211
Re: January Knapping Challenge
« Reply #16 on: January 14, 2009, 02:04:00 pm »
Quote from: Justin Snyder on January 14, 2009, 01:36:20 pm
You bleed less in those temps.  ::) ::) ::)

Yup right up until ya thaw out then leaks spring everywhere  :P
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: January Knapping Challenge
« Reply #17 on: January 14, 2009, 03:14:56 pm »
It's cold here, too, but a warmer day here and there. OK, how does everybody feel about trying a Bolen Bevel? I like the type, but haven't tried to make but a couple in the past. They're early Archaic, usually found in FL, AL, and GA. Corner-to side notched, with the notches often expanding or squarish with sharp barbs. The edges are usually beveled on opposite sides, and are generally concave (incurvate.) Size ranges from 1 1/2" to over 5". Typical materials are Coastal Plains chert or agatized coral. Here are a few more pics of originals for inspiration:



[attachment deleted by admin]
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline n2everythg

  • Member
  • Posts: 792
Re: January Knapping Challenge
« Reply #18 on: January 14, 2009, 03:22:59 pm »
Quote from: Hillbilly on January 14, 2009, 03:14:56 pm
The edges are usually beveled on opposite sides, and are generally concave (incurvate.)


only one question. does beveled on opposite sides...
does that mean that looking at the same face of the blade that long flakes are taken off one edge only with short flakes on the same face opposite edge?

that is what I think I am seeing in the pic.
thanks
wade
Logged
N2
East Coast of Nowhere

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: January Knapping Challenge
« Reply #19 on: January 14, 2009, 03:54:42 pm »
Beveling is a typical sharpening strategy, probably used on hafted points. A beveled cross-section would be where one edge was pressure flaked from the top only, then the point turned over and the other edge pressure flaked the same way, leaving a cross-section like this:



[attachment deleted by admin]
« Last Edit: January 14, 2009, 04:24:38 pm by Hillbilly »
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: January Knapping Challenge
« Reply #20 on: January 14, 2009, 04:04:33 pm »
how many months did you say I had to make each point?    ;D

 :D *dang...that's funny N2!* :D

I like the Otoe point, but I guess the Bolen is OK too (I think I can actually make one of those).

Sounds like fun.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline koan

  • Member
  • Posts: 2,393
  • Brian D. Mo.
Re: January Knapping Challenge
« Reply #21 on: January 14, 2009, 04:09:31 pm »
Dang Hillbilly, thats how mine already look..cant never get the center line down the center :D....Brian
Logged
When you complement a lady on her dress.....make sure she is the one wearing it.....

Offline Bone pile

  • Member
  • Posts: 1,491
Re: January Knapping Challenge
« Reply #22 on: January 14, 2009, 08:45:04 pm »
Haven't tried one of those, sounds like a challange.Whats the time frame?
Bone pile
Logged
Venice Florida

Offline knap_123

  • Member
  • Posts: 572
Re: January Knapping Challenge
« Reply #23 on: January 14, 2009, 09:18:34 pm »
man, i got some coral and Georgia c.p.  cooking now.  so i will give it a shot as well. we are sticking with this point right? ;D
Logged

Offline Otoe Bow

  • Member
  • Posts: 898
  • Mike Chase, Afghanistan
Re: January Knapping Challenge
« Reply #24 on: January 15, 2009, 12:44:36 am »
I'm game.

Mike
Logged
So far, I haven't found any Osage or knappable rock over here.  Embrace the suck

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: January Knapping Challenge
« Reply #25 on: January 15, 2009, 01:27:42 am »
so Beveling is the point to be made?
Logged
Mililani Hawaii

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: January Knapping Challenge
« Reply #26 on: January 15, 2009, 09:49:45 am »
Sounds like nobody has a problem with the Bolen Bevel as the type to make? Post 'em up any time this month, or maybe a bit into February as it's already halfway through January. I guess just post pics on this thread. Both sides and side view. Come on, let's get some participation. I know we have a bunch of knappers on here, I wanna see some pics. :)
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline J. DEMPLER

  • Member
  • Posts: 163
  • It ain't knappin' if you ain't bleedin'
Re: January Knapping Challenge-Bolen Bevel point
« Reply #27 on: January 15, 2009, 01:18:17 pm »
Does the type of rock matter?
Logged
There is a place for all of Gods creatures, right next to the potatoes and gravy.

Madison, Indiana

Offline DanaM

  • Member
  • Posts: 9,211
Re: January Knapping Challenge-Bolen Bevel point
« Reply #28 on: January 15, 2009, 01:21:37 pm »
What was the purpose of the differently angled bevels Steve?
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: January Knapping Challenge-Bolen Bevel point
« Reply #29 on: January 15, 2009, 03:03:19 pm »
@ J. Dempler:  Any kind of rock or material is fine. Ideally, they would be made from the correct material, but with different regional styles there's no way for everyone to have access to rock from all parts of the country.

@ Dana: Dana, I think beveling is just an easy, efficient way to sharpen tools, plus, it doesn't use up as much material with each resharpening as it would to flake each edge from both sides. A lot of the Early/mid Archaic points show beveling: Daltons, Thebes, Lost Lake, Bolen, Dovetails, etc.

« Last Edit: January 15, 2009, 03:20:13 pm by Hillbilly »
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.
Pages: 1 [2] 3 4 ... 9
« previous next »