« previous next »
Pages: [1]

Author Topic: compression crack  (Read 2483 times)

0 Members and 1 Guest are viewing this topic.

BCB

  • Guest
compression crack
« on: September 10, 2008, 03:15:38 pm »
I have just finished my first osage flat bow and not without problems
It has a compression crack on the top limb about an inch above the fade
its about 1/2 in. long in short of a "V" shape
what do I do?
 ??? >:(
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: compression crack
« Reply #1 on: September 10, 2008, 03:50:04 pm »
  Are you sure it is compression? sounds like it is on the back of the bow. You can often wrap a crack with sinew or linen to hold it down, Steve
Logged

woody

  • Guest
Re: compression crack
« Reply #2 on: September 10, 2008, 04:09:15 pm »
If it is a compression fracture, then you could poke some holes along the length of the crack with a fine, sharp tool.  I read this in one of the TBBs and tried it...the bow hasn't failed yet, though I can't prove it is due to the hole-poking technique.  Good luck!
Logged

Offline PeteC

  • Member
  • Posts: 2,014
Re: compression crack
« Reply #3 on: September 10, 2008, 04:21:41 pm »
Hey Cody,can you put up a picture?If not, bring it wednesday and I'll look it.  God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: compression crack
« Reply #4 on: September 10, 2008, 05:06:09 pm »
Are the cracks on the belly or back and do they run across the limb or with the grain?   Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »