« previous next »
Pages: [1]

Author Topic: Mullberry Sapwood  (Read 2477 times)

0 Members and 1 Guest are viewing this topic.

Offline Don

  • Member
  • Posts: 331
Mullberry Sapwood
« on: August 20, 2008, 09:40:03 pm »
 Hello.
 Cut some Mullberry today and found the sapwood looks to be a bout 1/2" thick.
Is it usually that thick?
Don
Logged

Offline Auggie

  • Member
  • Posts: 652
  • redneck engineer
Re: Mullberry Sapwood
« Reply #1 on: August 20, 2008, 10:50:50 pm »
Probably not but God makes every thing different. Ive got some BL thats got some sap wood thick like that,and a BL 100 ft away from it had really thin sap wood. Dont sweat it, carve it off and make yer a bow!
Logged
laugh. its good for ya

Offline Don

  • Member
  • Posts: 331
Re: Mullberry Sapwood
« Reply #2 on: August 20, 2008, 11:09:21 pm »
I was a little surprised to see it that wide.
The bark mostly let go when splitting, then 4 or 5 wide rings [whitish yellow] and then the yellow heart wood.
I assumed the whitish yellow is the sap wood, just wanted to be sure. First time working with Mullberry.
I got 4 stave ,not super straight but will do.
Guess I'll get to pealing them tomorrow night and get them sealed.
Thanks. Don
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Mullberry Sapwood
« Reply #3 on: August 21, 2008, 12:20:14 am »
Most of the mulberry I've seen has had thick growth rings in general. Half inch sapwood would not be uncommon. I've seen mulberry rings almost that thick.
  Don't worry about the staves not being straight. Just follow the grain and you will do fine. Mulberry will make an excellent bow that is light in hand and fast.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Mullberry Sapwood
« Reply #4 on: August 21, 2008, 01:20:22 am »
1/2"  :D I have one in my driveway that has 2" of sapwood. Most of it around here has about 1/2" until it gets to around 8" diameter, then it gets out to 1" to 1 1/2".  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Mullberry Sapwood
« Reply #5 on: August 21, 2008, 01:33:48 am »
                            The Mulberry and Locust both have a Lot of Sap Wood on them around here....
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline shamus

  • Member
  • Posts: 332
Re: Mullberry Sapwood
« Reply #6 on: August 21, 2008, 08:27:33 am »
It's common. Thick rings, and thick sapwood.
Logged
Pages: [1]
« previous next »