« previous next »
Pages: [1]

Author Topic: Horn Bow question  (Read 3578 times)

0 Members and 1 Guest are viewing this topic.

galew

  • Guest
Horn Bow question
« on: September 14, 2008, 11:41:09 pm »
I have built a couple self bows years ago, I now want to try a horn bow.
As the horn is used for compression only, (Horn belly on composite) I, being I do not have any long horns, was wondering why I could not use the horn in strips (Like laying a hardwood floor )
I would think it would work but after reviewing several books and many forums I have never seen any reference to having any use of strips of anything except sinew on a bow.
Does anyone have any ideas on this?

Logged

Offline welch2

  • Member
  • Posts: 378
  • redneck heathen
Re: Horn Bow question
« Reply #1 on: September 15, 2008, 12:06:49 am »
Some of the Turkish bows were built that way . You will probably need to make very tight butt joints ,no gaps anywhere.

Ralph
Logged

Offline burn em up chuck

  • Member
  • Posts: 718
Re: Horn Bow question
« Reply #2 on: September 15, 2008, 01:19:09 am »
check out "BOWS & ARROWS of the NATIVE AMERICANS" by JIM HAMM. the bow on the cover is made with 4 pieces of buffalo horn on the belly. thats the only reference i have, i know thats not exactly what you ask for,but it's a start. hope it helped somehow. good luke.

                                                                                                      chuck
Logged
Honored to say I'm a Member of the
         
                 Twin Oaks Bowhunters club

dskittle

  • Guest
Re: Horn Bow question
« Reply #3 on: September 18, 2008, 10:26:58 pm »
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Horn Bow question
« Reply #4 on: September 18, 2008, 10:42:33 pm »
  Maybe James Parker will see this. He has made several horn bows.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Horn Bow question
« Reply #5 on: September 18, 2008, 11:35:27 pm »
What Ralph said, no fancy joints, just butt them up tight to each other. Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Horn Bow question
« Reply #6 on: September 19, 2008, 05:02:18 pm »
Seems to me the horn bow would need to be completely wrapped with sinew to make sure the horn strips do not "pop" off the belly.  I think Jim Hamm made a bow using short strips of buffalo horn...so it definitely can be done.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Bowbound

  • Guest
Re: Horn Bow question
« Reply #7 on: September 19, 2008, 05:06:45 pm »
Do you mean like putting on bricks or like separate full width bits placed along the limb?

Hope this makes sense
Logged

Far East Archer

  • Guest
Re: Horn Bow question
« Reply #8 on: September 20, 2008, 02:37:06 am »
Hmm that is very interesting idea.
Really cool if it works. Which it does yes?

I may try this out, I suppose the joint cannot be in a high bending area or does not it matter?
If so, I think I have some pieces that may work for this.

Alex
Logged
Pages: [1]
« previous next »