Author Topic: bandsaw to cut 16gauge sheet steel?  (Read 4325 times)

0 Members and 1 Guest are viewing this topic.

Offline Mafort

  • Member
  • Posts: 424
bandsaw to cut 16gauge sheet steel?
« on: November 07, 2021, 06:46:36 pm »
I have some 16 gauge high carbon steel that’s not been tempered or hardened. Cutting trade points out of the steel with a grinder is tiresome and I was wondering if I could use my hobby bandsaw I have to cut the steel sheet with the proper blade and proper TPI? Any tips?

Offline sleek

  • Member
  • Posts: 6,764
Re: bandsaw to cut 16gauge sheet steel?
« Reply #1 on: November 07, 2021, 09:24:33 pm »
The more teeth the better and push hard with a low rpm
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline KHalverson

  • Member
  • Posts: 758
Re: bandsaw to cut 16gauge sheet steel?
« Reply #2 on: November 08, 2021, 06:45:46 pm »
is your saw variable speed.
most saws for cutting steel turn way less feet per minute than a saw designed for wood.
16 teeth per inch should cut that thickness.