Author Topic: Osage Pin knot question  (Read 1046 times)

0 Members and 1 Guest are viewing this topic.

Offline Jakesnyder

  • Member
  • Posts: 458
Osage Pin knot question
« on: May 04, 2020, 06:36:08 pm »
Is this the correct way to deal with pin knots in osage? Or do you have to leave the nipple looking thing? If you know what I mean?

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Osage Pin knot question
« Reply #1 on: May 04, 2020, 06:50:59 pm »
Looks good. The grain goes around the knot, so no need to leave a bump.
Jim Davis

Kentucky--formerly Maine

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage Pin knot question
« Reply #2 on: May 04, 2020, 07:39:09 pm »
Looks good to me. I'd put a drop of super glue on it and keep on, but that's just me.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Osage Pin knot question
« Reply #3 on: May 05, 2020, 05:52:47 am »
Looks good, I personally don't like to cut the top of the pin off, I just inland it off as I am chasing the ring and after in the ring I want come back and carefully scrape over it, the ring is very thin on top of the knot.  :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Osage Pin knot question
« Reply #4 on: May 05, 2020, 07:06:24 am »
Just the way I do it.