Author Topic: Leather strike plate question  (Read 2018 times)

0 Members and 1 Guest are viewing this topic.

Offline clewis

  • Member
  • Posts: 119
Leather strike plate question
« on: June 16, 2019, 02:11:07 pm »
I’ve never done a leather strike plate before so I’m curious which type of glue would work best? I’ve got tb3 and other wood glues, epoxy?
Thanks

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Leather strike plate question
« Reply #1 on: June 16, 2019, 02:40:14 pm »
titebond is fine

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Leather strike plate question
« Reply #2 on: June 16, 2019, 03:41:55 pm »
I always use superglue but TB, wood glue, or epoxy would also work.
I started out with nothin' and I still got most of it left

Offline Dvshunter

  • Member
  • Posts: 1,402
Re: Leather strike plate question
« Reply #3 on: June 16, 2019, 03:57:28 pm »
I use contact cement for mine.
"There is a natural mystic blowing through the air; if you listen carefully now you will hear." Robert Nesta Marley

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Leather strike plate question
« Reply #4 on: June 16, 2019, 04:56:23 pm »
I also use contact cement but the other glues mentioned will also work.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Eric Krewson

  • Member
  • Posts: 5,434
Re: Leather strike plate question
« Reply #5 on: June 17, 2019, 05:24:39 am »
I prefer barge cement which is a contact glue made for leather.

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Leather strike plate question
« Reply #6 on: June 17, 2019, 05:51:03 am »
I don't use glue. I use 3m ATG Transfer tape. It's super thin, very sticky, neat, easy to use, holds in all weather, but if you ever want it off, you just rip the leather off... most leather will let go before the tape... then roll the tape off the bow with your thumb, with no damage to the finish.

If you can't find the 3M ATG tape, or don't need that much, or don't want to spend that much, the tape they sell in the flooring dept of home improvement stores is close enough to the same thing, and comes in smaller rolls. It's used to hold down adhesive-less vinyl flooring at door openings and such.

I also use this tape to hold the built-up leather arrow shelves on my bows, and have never had a failure in either application.
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline TimBo

  • Member
  • Posts: 1,047
Re: Leather strike plate question
« Reply #7 on: June 17, 2019, 12:44:10 pm »
I have always used Barge, but the transfer tape sounds pretty cool.  Barge can be a bit messy, especially in my hands!

Offline Weylin

  • Member
  • Posts: 2,296
Re: Leather strike plate question
« Reply #8 on: June 17, 2019, 04:28:52 pm »
Another vote for contact cement.