« previous next »
Pages: 1 2 [3]

Author Topic: Backing for Tri-laminate ELB  (Read 19128 times)

0 Members and 2 Guests are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Backing for Tri-laminate ELB
« Reply #30 on: March 17, 2019, 10:06:43 am »
I'd suggest you pre-shape the lams before glue up or the tips will be too thick. Getting the tip shaped ahead of glue up will prevent this. You can leave the handle area full width for now and this will give you a place to clamp the bow while tillering.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Redhawke

  • Member
  • Posts: 26
Re: Backing for Tri-laminate ELB
« Reply #31 on: March 17, 2019, 12:00:50 pm »
Oh my, just walk inside from gluing it all together. Wish me luck. )-w(
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Backing for Tri-laminate ELB
« Reply #32 on: March 17, 2019, 03:18:58 pm »
You'll probably just loose the belly wood at the tips but the tips are non-working anyway so it will be a cosmetic problem.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: 1 2 [3]
« previous next »