« previous next »
Pages: [1]

Author Topic: How do you remove horn from a core for a 2nd attempt?  (Read 5498 times)

0 Members and 1 Guest are viewing this topic.

Offline loefflerchuck

  • Member
  • Posts: 1,129
    • www.heartwoodbows.com
How do you remove horn from a core for a 2nd attempt?
« on: April 14, 2019, 04:24:52 pm »
I have a core with the horn already glued about 3 weeks ago and one limb is not quite right. I want to get the horn off one limb and get it better. The glue job itself is flawless with good glue. I've only taken the horn off a limb after a bad glue-up and only a couple days after attaching it.

What way has worked best for anyone who has done this? I was going to try steam or a soak, but would think it would need to be soaked for a long time.

The glue is sinew glue mixed with a little bladder glue.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: How do you remove horn from a core for a 2nd attempt?
« Reply #1 on: April 14, 2019, 04:53:33 pm »
Chuck, you might contacting James Parker(huntworthyproductions). He could probably tell you how. I'll pm you his phone number if you need it.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline loefflerchuck

  • Member
  • Posts: 1,129
    • www.heartwoodbows.com
Re: How do you remove horn from a core for a 2nd attempt?
« Reply #2 on: April 15, 2019, 08:43:57 am »
Thanks Pat
Logged

Offline jb3

  • Member
  • Posts: 1
Re: How do you remove horn from a core for a 2nd attempt?
« Reply #3 on: September 21, 2019, 09:04:54 pm »
Did you ever find an answer to this question?

I am looking for the same information, thought i would check before I open a new thread.
Logged

bownarra

  • Guest
Re: How do you remove horn from a core for a 2nd attempt?
« Reply #4 on: September 23, 2019, 01:30:23 am »
Easy just soak it in water for about 2 weeks.
Logged
Pages: [1]
« previous next »