Author Topic: Need answer fast splitting ash  (Read 1432 times)

0 Members and 1 Guest are viewing this topic.

Offline Badger

  • Member
  • Posts: 8,124
Need answer fast splitting ash
« on: November 29, 2017, 08:28:05 am »
   A tree cutter just called me about an ash he is taking down, I have a bad back so am limited, How hard is it to split ash. I can hire some help if need be. And my 70 years old and smoking habit aint helping much either.

Offline ksnow

  • Member
  • Posts: 545
Re: Need answer fast splitting ash
« Reply #1 on: November 29, 2017, 08:33:17 am »
If its a nice log, ash splits very easily.  No interlocking grain.  If its really straight, I have kerfed many with a circular saw to guide the splits.

Kyle

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Need answer fast splitting ash
« Reply #2 on: November 29, 2017, 08:34:49 am »
The ones I've done were medium sized and split pretty easy with minimal interlocking of grain... a lot easier than elm. White ash? There's no bugs in it is there? The emerald ash borers killed them all here.
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline Strichev

  • Member
  • Posts: 172
Re: Need answer fast splitting ash
« Reply #3 on: November 29, 2017, 08:36:28 am »
If it has nice grain it splits easily, the first 3 feet above the ground were harder to split when I did it. The smaller bits can be split in a controllable manner using a froe.  That's with Fraxinus Excelsior.

Offline upstatenybowyer

  • Member
  • Posts: 2,700
Re: Need answer fast splitting ash
« Reply #4 on: November 29, 2017, 08:41:21 am »
For me, ash has always been the easiest wood to split. When it's time to split kindling, I always dig out the ash.  :OK
"Even as the archer loves the arrow that flies, so too he loves the bow that remains constant in his hands."

Nigerian Proverb

Offline Badger

  • Member
  • Posts: 8,124
Re: Need answer fast splitting ash
« Reply #5 on: November 29, 2017, 08:50:50 am »
   That's good news, I was trying to split a 12" log of pear yesterday and my axe just kept bouncing out of it. I beat on it for 20 minutes and never got a split started. I ended up sawing it up and will use it for laminated longbows.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Need answer fast splitting ash
« Reply #6 on: November 29, 2017, 09:00:46 am »
Even sopping wet, ash splits easily. 

Good luck!
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Need answer fast splitting ash
« Reply #7 on: November 29, 2017, 09:00:55 am »
That ash should split nice and clean for a ya depending on the grain run of course.I've split cords and cords of it.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline ohma2

  • Member
  • Posts: 960
Re: Need answer fast splitting ash
« Reply #8 on: November 29, 2017, 03:50:17 pm »
As said easy to split ,everything around here thats ash has been ate up by borers.the  appearance of small D shaped holes in the bark tells the story.

Offline Badger

  • Member
  • Posts: 8,124
Re: Need answer fast splitting ash
« Reply #9 on: November 30, 2017, 07:31:25 am »
   It did split easy enough but I decided to pass on it because it was too light. I took a sample home and dried it in the microwave and it just wasn't as tight grained and dense as I like ash to be.