Finale Tiller check please ?

[Stick Bender]

Brad I posted at the same time as you but thats a good point those guys that are lucky enought to have a grided pulley system have easer go of it but every bow pic that my wife takes of me drawing looks like the botom limd is shorter & distorted maybe I will put her on a stool next time she is a foot shorter then me ,DC had a good thread on pic distortion even high grade lenses have some distortion I think pics are good for spotting hinges and that type thing but with undulations & the like can give false reads also. But its the best tool I have tell I can devolope a good tiller eye.

[DC]

It's a PITA but I think the best is two pics, one upside down.

[Stick Bender]

Well got the FF string on and almost shot in but here is the numbers with 11gpp arrow & full draw good release this is a 170 fps bow all day so far , I feel good its taken me almost a year & half and a lot of help from you guys to bust 170 fps plus a lot of failed bows , I could probably scale the arrow back a bit and get more but 530 grain arrow is my hunting weight !

[DC]

Great number! I hit 173 once. I've never managed consecutive 170's, yet

[Stick Bender]

That FF string has taken a while to get to stop sliping at the hitch knot Im averaging about 171 fps with my normal release Im probaby at maybe 160 arrows im leaving it strung for a couple hours to see if it stays consistent !

[BowEd]

Just make a double loop string for it Ritch.Otherwise there was a thread on keeping FF string from slipping.I think just a few more wraps around the timber hitch does it.

[bradsmith2010]

I put super glue on the timber hitch as well,,and tie a knot at the back of the hitch,,,,, that wont slip past the knot,, congrats on your bow,, nice shooting

[Stick Bender]

Thanks Brad I tied the knot it stopped, when I get every thing dialed in I will make a double loop !

[bradsmith2010]

Beadman you are right a few more wraps will work too,,