First bow -tiller advice

[Lucasade]

So I've finally got round to actually making a bow - this is lilac longbow for my little boy, aiming for 10-15# @18". I spent about 4 hours tillering it the other evening in front of a mirror and I think I've got as far as I can without a tillering tree, which is next on my list of things to make. I just wanted to get advice on where to go next with this, especially as it is a training tool before I start on an 80# hazel warbow.

As you can see in the photos it's taken a lot of set which I guess means I've been working too quick, and I also think the handle is still somewhat stiff. Please don't spare my feelings if I've done a lousy job as I want to learn to do it better. Apologies also for the quality of the video and lack of stills - I'm still figuring out the technology.

https://youtu.be/bYaG9kNJwDg

Unbraced after attacking it:



Before I started:



A couple showing the set:





Thanks as always!

[blackhawk]

Both fades are stiff...and id make a few more bows (hunting weights) first before jumping onto a warbow next for your second attempt.

[George Tsoukalas]

I could not tell anything from the video.  Did you draw it 15"? Jawge

[Del the cat]

IMO it's easier to make a 40# than a 15#.
The margin of error on V light bows is rather fine.
Looks ok in the vid, maybe a tad stiff on the outer 1/3 of the upper, but to get it flexing you'd prob end up with no wood left.
It looks like a quit while you are ahead job to me .
Del

[Lucasade]

Thank you all - I forgot to say at the moment I've got it back to 13-15 inches, and it pulls 15# around there. I'm impressed how little wood it needs! I guess I'll see what I can do for the last couple of inches when I've got a tiller tree and leave it there.

I've only got wood (and interest quite honestly) for warbows after this one until a couple of staves are seasoned next year...