Author Topic: Hollow in limb  (Read 1152 times)

0 Members and 1 Guest are viewing this topic.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Hollow in limb
« on: September 03, 2015, 05:30:14 pm »
Hi All,
How do I deal with a dip in the back of a limb, and is it better to have it in the upper or lower limb? The hollow runs 1/3 the length of the bow starting a few inches from a tip, extending from the centre line to the edge. Will post pictures later

Offline PatM

  • Member
  • Posts: 6,737
Re: Hollow in limb
« Reply #1 on: September 03, 2015, 06:12:26 pm »
 Upper limb and it probably doesn't require any special treatment.

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Hollow in limb
« Reply #2 on: September 03, 2015, 08:20:07 pm »
I agree with PatM
Whatever you are, be a good one.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Hollow in limb
« Reply #3 on: September 03, 2015, 09:59:00 pm »
Usually when the back dips the belly should mirror what the back does. If it is shallow, it may not matter. Photos would help. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Hollow in limb
« Reply #4 on: September 04, 2015, 04:10:15 am »
I usually go for fairly flat belled bows but if the limb is hollowed I go with a more rounded belly to keep the limb thickness in that area. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Re: Hollow in limb
« Reply #5 on: September 04, 2015, 04:12:07 am »
OK so here's a pic of the hollow, bow will hopefully be compass bend long bow, oval or D cross-section



as noted at the beginning, the dip doesn't extend the full width of the limb, only to the centre-line.