« previous next »
Pages: [1]

Author Topic: Mulberry Recurve  (Read 3107 times)

0 Members and 1 Guest are viewing this topic.

Offline LittleBen

  • Member
  • Posts: 190
Mulberry Recurve
« on: July 10, 2015, 09:39:36 pm »
Here is a bow I've been tinkering with for a bit.

Started out as a pile of billet length logs I found in a park the very day they were cut. I was so bummed that they cut down my go to mulberry snacking tree, I took all the wood home as payment. My wife was not impressed with me, but I got the wood. Got enough for 4 sets of billets. All with character, and three sets wide enough for adult flatbows.

The bow is 58" ntn, about 1 1/2" wide at the fades, stiff tips. No overlays. All bending and straightening done with the heat gun. Took a fair bit of heat to get aligned. Draws 45# @ 26". Some minor fretting on top limb, evenly distributed, I think it will survive, they are not getting worse.

Stained, then a few coats of tru-oil/linseed mix.




Full draw coming as soon as I can get my photographer to cooperate. Sorry for the crap picture quality.

Cheers
Logged

Offline make-n-break

  • Member
  • Posts: 378
Re: Mulberry Recurve
« Reply #1 on: July 10, 2015, 10:03:56 pm »
The ring pattern on that handle turned out awesome
Logged
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1

Offline HighEagle

  • Member
  • Posts: 227
Re: Mulberry Recurve
« Reply #2 on: July 11, 2015, 01:58:04 am »
Nice bow. I think you could post that one on Sleeks, master piece bow challenge,
Logged
Armstrong, BC

Offline Stixnstones

  • Member
  • Posts: 1,695
Re: Mulberry Recurve
« Reply #3 on: July 11, 2015, 09:41:41 am »
Man , i really like that one. Sweet bow!
Logged
DevilsBeachSelfbows

Offline bubby

  • Member
  • Posts: 11,054
Re: Mulberry Recurve
« Reply #4 on: July 11, 2015, 10:15:24 am »
Nice one ben
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Mulberry Recurve
« Reply #5 on: July 11, 2015, 11:38:19 am »
Nice job! Have never liked to waste mulberry myself.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline GB

  • Member
  • Posts: 519
Re: Mulberry Recurve
« Reply #6 on: July 11, 2015, 02:27:02 pm »
Great looking bow, Ben!
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline bowmo

  • Member
  • Posts: 1,035
Re: Mulberry Recurve
« Reply #7 on: July 11, 2015, 03:33:47 pm »
Quite the curves on that one for it's length. Very nice. Makes me want to go work on the spliced up mulberry stave I've had sitting in the shop for like 8 years now.
Logged

Offline LittleBen

  • Member
  • Posts: 190
Re: Mulberry Recurve
« Reply #8 on: July 11, 2015, 03:44:51 pm »
Thanks guys!

Bowmo, yeah Theres a fair bit of curve in there. The angle isn't too severe though, so that keeps tillering more do-able, especially on a bow with snake in it like this one. I think it's just important to bring the bend in the limb all the way to the beginning of the stiff curves. It's easy to leave the outer part of the working limb too stiff. I really try to make sure I'm using all my working limb when I have stiff tips like that.
Logged
Pages: [1]
« previous next »