Author Topic: Flight arrow design & tradeoffs  (Read 26779 times)

0 Members and 1 Guest are viewing this topic.

Offline Badger

  • Member
  • Posts: 8,124
Re: Flight arrow design & tradeoffs
« Reply #30 on: February 20, 2015, 05:48:53 pm »
  Thats really good! When are you going to test them out?

Offline Lukasz Nawalny

  • Member
  • Posts: 233
  • Lukasz Nawalny
    • Camelot bows
Re: Flight arrow design & tradeoffs
« Reply #31 on: February 20, 2015, 06:41:51 pm »
in next week. I dont have very big expectations, I be happy with shoot over 300 m. It is not quite flightbow - little to long and I have very safe , heavy string. I dont push this bow to the limit, a lot of work with hornbow and Im little affraid .

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Flight arrow design & tradeoffs
« Reply #32 on: February 21, 2015, 06:57:12 pm »
Hope it does better than you think !!
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: Flight arrow design & tradeoffs
« Reply #33 on: August 31, 2015, 02:24:39 pm »
Newby Arvin ! I was burnishing some different flight arrows this weekend. A dim light came on in my little head. I was wondering if compression in the shaft would change the spine  or weight or length . I clamped two boards on my bench and established a length. I checked the spine and weighed the arrow.  I then commenced to compressing the shaft with a shaft tamer and straighten  as I went. Well I noticed no change in the length. The spine did not change . The weight came down 3 grains. Must have squeezed the $&&@ out of it. Ya I know I'm bored. You guys ever got any different results.  Arvin
Well I'll say!!  Osage is king!!

Offline Badger

  • Member
  • Posts: 8,124
Re: Flight arrow design & tradeoffs
« Reply #34 on: August 31, 2015, 03:01:26 pm »
  I have tried heat treating arrows from different woods, some it makes almost no difference and some it makes a very measurable difference.