« previous next »
Pages: [1]

Author Topic: Question  (Read 1951 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
Question
« on: March 11, 2015, 01:40:53 pm »
I glued my other ipe and hickory billet together. It has about 1/2" more reflex. What one should I make top and bottom?
Logged
Nothing ventured nothing gained

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Question
« Reply #1 on: March 11, 2015, 01:45:19 pm »
I make my bows symmetrical and make that decision later in the tillering process.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PatM

  • Member
  • Posts: 6,737
Re: Question
« Reply #2 on: March 11, 2015, 01:52:18 pm »
Based on greater reflexed glue-ups fooling the bowyer more weightwise, I'd make it the top limb.   If you make it the bottom it may come round more than you would like after some shooting.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Question
« Reply #3 on: March 11, 2015, 01:57:30 pm »
I agree with Pat. You could also snip an 1" off the higher reflexed end to even it out, then make it your bottom.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Question
« Reply #4 on: March 11, 2015, 02:04:30 pm »
I was thinking that Chris, I've never made a bow with a shorter bottom limb. Also I wanna cut a shelf in. So Im making the riser part a little longer than normal.
Logged
Nothing ventured nothing gained

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Question
« Reply #5 on: March 11, 2015, 11:51:22 pm »
After you tiller the bow and shoot it in you won't see much difference in reflex.
Logged
Pages: [1]
« previous next »