« previous next »
Pages: [1]

Author Topic: Initial detection of Set ... updated tiller  (Read 2455 times)

0 Members and 1 Guest are viewing this topic.

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Initial detection of Set ... updated tiller
« on: March 03, 2015, 05:55:33 pm »
Working with an ash board ... 66", 1 3/4 @ fades to 1/2" tips.
Objective is 47# @ 25".
Still working w/ long string ... 18", 48#.
I've been tillering mostly be removing wood from belly.
Noticed bit of set mid limb, both limbs.  The bottom limb is bit shorter in length than top.  Top limb set is a bit more than bottom.

Does detection of set this early in tillering process suggest tillering approach should change?  For example, change to removing wood from edges?  Or focusing more on the area nearer to fades?
« Last Edit: March 05, 2015, 12:21:23 pm by Knoll »
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline PatM

  • Member
  • Posts: 6,737
Re: Initial detection of Set ... impact on tillering focus
« Reply #1 on: March 03, 2015, 06:14:52 pm »
There is no good reason to reduce width.
Logged

Offline Badger

  • Member
  • Posts: 8,124
bow
« Reply #2 on: March 03, 2015, 06:17:16 pm »
   I didn't see the pic in the first post. I made. Maybe one of the guys here can come along and put little marks where it is stiffer. I see several areas that could uses a little work. Do you know how to use a tillering gizmo?
« Last Edit: March 03, 2015, 10:09:32 pm by Badger »
Logged

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Initial detection of Set ... impact on tillering focus (pic added)
« Reply #3 on: March 03, 2015, 10:43:05 pm »
do you know what the moisture content of the wood is??? that might be a reason the wood is taking a set,,
Logged

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Initial detection of Set ... impact on tillering focus (pic added)
« Reply #4 on: March 03, 2015, 10:44:58 pm »
People tend to want to tiller too soon near the fades. Don't get to eager there. ;)
Logged
Debating is an intellectual exchange of differing views...with no winners.

mikekeswick

  • Guest
Re: Initial detection of Set ... impact on tillering focus (pic added)
« Reply #5 on: March 04, 2015, 02:36:50 am »
Your bow will take some set.
It's upto you to distribute it where it will do the least harm.
You want to no set inner limb, a little mid limb and the rest midlimb to tip....ala the mantra bow from TBB's.
If your bow is taking set mid limb alone now then work on the areas it isn't taking set - it's that simple! I always draw the profile of the bow onto my tillering board so that immediately I release pressure on the string (longstring) I can see exactly where the set has occured. If i'm getting close to fulldraw and the bow is braced i'll exercise it then unstring and quickly put it up against that traced profileto get the yeball on set and where it is.
As Badger says get a tillering gizmo made if you haven't already got one. Invaluable tool.
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Initial detection of Set ... updated tiller
« Reply #6 on: March 04, 2015, 03:58:55 pm »
Here's where the bow is today.  47# @ 23" and 6 1/2" brace.







Left limb (mid portion) still seems to be in need of wood removal.

Whatcha think?

Also, am planning to reflex/temper the limbs.  Would this be good point to do so, or wait until full draw (25") is reached?
« Last Edit: March 05, 2015, 12:13:04 pm by Knoll »
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Initial detection of Set ... updated tiller
« Reply #7 on: March 07, 2015, 01:36:23 pm »
Here's where we ended up.



And immediately after unstringing.



The Wife is shopping.  So no f/d yet.
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Initial detection of Set ... updated tiller
« Reply #8 on: March 07, 2015, 02:24:42 pm »
It looks a lot more even to me, but you're going to have to get that FD to us when she gets home ;)
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Initial detection of Set ... updated tiller
« Reply #9 on: March 07, 2015, 03:03:29 pm »
it looks very nice,, shooting for distance or through a chrono will give you information that will help on your next,,
Logged
Pages: [1]
« previous next »