« previous next »
Pages: [1]

Author Topic: fake snake skins  (Read 3217 times)

0 Members and 1 Guest are viewing this topic.

Offline rover brewer

  • Member
  • Posts: 285
fake snake skins
« on: January 03, 2015, 07:06:56 am »
just got some fake snake skins from 3 rivers , no manufacture suggested how to install so, just wondering if you soak them in water before you glue, same as other backing material like cloth.thanks for any help.
Logged
john 3:16

Offline nlester

  • Member
  • Posts: 205
Re: fake snake skins
« Reply #1 on: January 03, 2015, 07:51:15 am »
No need to soak.  TBII will work for your adhesive.  Once it dries, put a light coat of TBII over the skin.  That really helps to make the snake pattern stand out.  Good luck
Logged

Offline rover brewer

  • Member
  • Posts: 285
Re: fake snake skins
« Reply #2 on: January 03, 2015, 11:37:07 am »
thanks for your reply, I guess this  being a new product there's not much research or experience on this , I have also asked 3 rivers, haven't heard back yet, so as soon as I find out I will post. thanks again for your reply I'm sure there's nothing wrong with how you done yours I was just hoping to get a few more replies.




 
Logged
john 3:16

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: fake snake skins
« Reply #3 on: January 03, 2015, 02:39:12 pm »
Thats how I would do it too. I like the TBII. dries clear. Its pretty good stuff for backings I think.  Danny
Logged
"You know a tree by the fruit it bears"   God

Offline rover brewer

  • Member
  • Posts: 285
Re: fake snake skins
« Reply #4 on: January 03, 2015, 02:55:48 pm »
OK so far I got 3 answers 2 say soak, squeeze, glue and one said glue dry and seal, I did the soak, squeeze and glue, but I have another bow I'm going to order fake skins for it and I will do it dry.Oh the answers came from manufacturer.
Logged
john 3:16

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: fake snake skins
« Reply #5 on: January 03, 2015, 04:08:46 pm »
I've used them several times.  Dry over bamboo is what I did.  Wet may be better as I used tb3 and wished for a longer dry time.  If you get air pockets just work some glue under them from the edge.
Logged

Offline rover brewer

  • Member
  • Posts: 285
Re: fake snake skins
« Reply #6 on: January 03, 2015, 04:19:26 pm »
thanks prarie bowyer, I did use tb3 and will be sealing with tru oil.
Logged
john 3:16

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: fake snake skins
« Reply #7 on: January 03, 2015, 08:18:38 pm »
I lay the fake snake on the bench, pattern side down and then squirt TBIII down the center.  I use a rubber spatula to squeegee the glue around.  Then a thin layer of glue squeegeed across the bow limb using the spatula, then mate'em up!

If you want, you can squeegee a little glue into the fabric once it has dried.  Seems to seal it all down nicely.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Renacs

  • Member
  • Posts: 183
Re: fake snake skins
« Reply #8 on: January 03, 2015, 08:46:34 pm »
lets see some pics. i'm interested to see how they turn out.
Logged

Offline rover brewer

  • Member
  • Posts: 285
Re: fake snake skins
« Reply #9 on: January 04, 2015, 08:14:35 am »
thanks JW that's more or less how I done it except for using a spatula , I used my hand with rubber glove. I'm thinking about light coat of tb3 over the skins or just start coating with tru oil.Renacs I will see about posting pics it would have to be from my phone don't have a camera.
Logged
john 3:16

Offline ajooter

  • Member
  • Posts: 1,234
Re: fake snake skins
« Reply #10 on: January 04, 2015, 08:50:01 am »
http://www.primitivearcher.com/smf/index.php/topic,44744.135.html....osage outlaw did a follow along and put some on.  They look pretty good.
Logged
Pages: [1]
« previous next »