« previous next »
Pages: [1]

Author Topic: Black locust as a laminate?  (Read 2532 times)

0 Members and 1 Guest are viewing this topic.

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Black locust as a laminate?
« on: December 28, 2014, 07:55:21 pm »
If you haven't noticed laminates haven't been high on my to-do list, but I'm wondering if anyone's tried black locust as a back or belly? I know it's actually pretty strong in compression despite being prone to chrysals, but where it really shines is tension and overall stiffness.

So what's the deal?
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Black locust as a laminate?
« Reply #1 on: December 28, 2014, 07:57:47 pm »
Locust would probably make a great backing but I think I'd want a chased ring as the back.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gordon

  • Member
  • Posts: 3,299
Re: Black locust as a laminate?
« Reply #2 on: December 28, 2014, 08:35:56 pm »
I handled a boo backed black locust bow made by master bowyer John Strunk. It was a stunning piece of work.
Logged
Gordon

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Black locust as a laminate?
« Reply #3 on: December 28, 2014, 09:59:28 pm »
I have piece of black locust that's 2 growth rings. I have a bunch of yew lumber that's been staring at me in the corner. I'm planning to do a short BL backed yew bow, I'd like to try spliced in siyahs. In my mind it will be a cool bow, but who knows!
Laminates don't really interest me either, but these yew boards need to be bows.
my bow bucket list is pretty long, so I might as well get these out the way!
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Black locust as a laminate?
« Reply #4 on: December 29, 2014, 12:14:42 am »
Well now you know you gotta post pics, right? 'Cause you gotta. I'm looking at yew and ipe boards, and since I've only done a couple lams I'd love an example.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Black locust as a laminate?
« Reply #5 on: December 29, 2014, 04:17:00 pm »
  Have done BL with both hickory and bamboo backs.  I once bought a huge plank of it off ebay for very little and made at least 5 BBBL and HBBL recurves from it: large recurves, lots of deflex.  Nice shooters.

  So, the key is the stiffness of BL.   It is so stiff that, even backed, making a nice wide limb with a thin backing helps. a lot.  It just ISN'T osage or bulletwood, so it needs to be thinner, hence wider, or longer.

  I am in the camp with Baker concerning backings that says NARROWER is better than THINNER for backings, but with BL, in order to avoid frets on the belly, the total limb thickness on a 68" X 1.75" wide bow is only barely nudging toward 1/2".  So, you really should trap the backing and make sure the belly lam is still 2/3 of the total.
Logged
Pages: [1]
« previous next »