« previous next »
Pages: [1]

Author Topic: Belly lam old bow?  (Read 1417 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
Belly lam old bow?
« on: June 05, 2014, 10:59:27 am »
If I have an old bow I wanna make better... Can I grind the belly flat and add a lam to both limbs if I bring it up the fade?

The tiller is a little off and low weight
Logged
Nothing ventured nothing gained

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Belly lam old bow?
« Reply #1 on: June 05, 2014, 11:06:59 am »
What do you mean "old bow"?  You can add a belly lam to an already tillered bow to increase the draw weight.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Belly lam old bow?
« Reply #2 on: June 05, 2014, 11:32:52 am »
It's a small bow I made that is real light. Wanted to see of I could make it more useable.
Logged
Nothing ventured nothing gained

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Belly lam old bow?
« Reply #3 on: June 05, 2014, 11:56:27 am »
IMO yes, if the back is a suitable wood to take the strain.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Belly lam old bow?
« Reply #4 on: June 05, 2014, 12:16:20 pm »
Ive done it a few times as a quicky experiment. It works decent. The set the bow has taken will only partially be disguised. You only need to add lams over the working section, not the entire length of the limb.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
Pages: [1]
« previous next »