« previous next »
Pages: [1]

Author Topic: Stringing static recurve  (Read 4158 times)

0 Members and 1 Guest are viewing this topic.

Offline yellow feather

  • Member
  • Posts: 56
Stringing static recurve
« on: December 29, 2007, 03:18:10 pm »
 Is there a secret to stringing an old, all wood static recurve, that has real small tips. I just aquired one and am having a hard time figureing out how.The tips are so samll you can't use a stringer. It also has about 2 inches of reflex.  Thanks in advance.
                                       David ???
Logged
San Angelo, Texas

bowstick

  • Guest
Re: Stringing static recurve
« Reply #1 on: December 29, 2007, 03:57:01 pm »
Take your time, thats for sure.  My suggestion is the step through method with a real wide stance.  Or make a custom bowstringer to fit the bow.  Good luck, post pics if you have some :)
Logged

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Stringing static recurve
« Reply #2 on: December 29, 2007, 04:21:02 pm »
I would use a long string and exercise it quite a few times pulling it maybe 2" 30 times then go to 3" then 4".  Only after you are sure you have exercised it to well beyond brace height I would consider stringing. Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Stringing static recurve
« Reply #3 on: December 30, 2007, 08:26:21 am »
I use the push pul and have a series of pictures here http://marc.stoneflake.net/ on how I do it, it's under Bracing a Recurve. Unfortunately my site is down right now but should be back up shortly
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com
Pages: [1]
« previous next »