« previous next »
Pages: [1]

Author Topic: Tillering osage takedown, need 2nd opinion  (Read 979 times)

0 Members and 1 Guest are viewing this topic.

Offline Hrothgar

  • Member
  • Posts: 1,477
Tillering osage takedown, need 2nd opinion
« on: March 11, 2014, 09:50:53 am »
I'm tillering this osage takedown, but having a problem removing enough wood. Normally I've used a 1" metal tube for a handle but this time decided to go with a 11/4" tube. After compressing the tube is approximately 1 1/8" wide  by 1 1/2" deep, currently pulling #55 at 20". The limbs are 1 5/8" at the fades--pretty wide for osage I know. I would like for the final weight to be #55-57 at 27", I'm wondering if a little more should be removed from the sides at this stage, or just take it off the belly. Advice is welcome, thanks.
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline ajooter

  • Member
  • Posts: 1,234
Re: Tillering osage takedown, need 2nd opinion
« Reply #1 on: March 11, 2014, 10:30:27 am »
Did you leave the sapwood on the back?  The limbs looks pretty thick.  Nice bend so far though.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Tillering osage takedown, need 2nd opinion
« Reply #2 on: March 11, 2014, 10:37:38 am »
Fade is a little tight on the right. And the right is 5-8# stronger than the left, IMO.

Id also suggest leaving that width for a 55-60# bow. Just my .02 cents.
« Last Edit: March 11, 2014, 10:40:42 am by PEARL DRUMS »
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline adb

  • Member
  • Posts: 5,339
Re: Tillering osage takedown, need 2nd opinion
« Reply #3 on: March 11, 2014, 11:01:52 am »
I'm guessing you're using a long string, but the right limb looks stiffer to me. Try and get it to low brace asap. If you want to keep the width, no problem, it'll just end up thinner. Watch for twist if you do.

What is the back profile? And what's up with the tape on the limbs? Is that where you have knots?
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Tillering osage takedown, need 2nd opinion
« Reply #4 on: March 11, 2014, 11:03:24 am »
If I was you, I'd get that T/D grip fitted and glued before I did anymore tillering.
Logged

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: Tillering osage takedown, need 2nd opinion
« Reply #5 on: March 11, 2014, 11:07:43 am »
Got a picture of it assembled and unstrung? Proper tiller shape throughout the draw should be relative to the unstrung profile.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Tillering osage takedown, need 2nd opinion
« Reply #6 on: March 11, 2014, 11:47:26 am »
Quote from: adb on March 11, 2014, 11:03:24 am
If I was you, I'd get that T/D grip fitted and glued before I did anymore tillering.

Without question.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Tillering osage takedown, need 2nd opinion
« Reply #7 on: March 11, 2014, 02:49:48 pm »
Thanks for the input guys.
I had been relying on the tape to keep the collar tight, but you're right I need to get a limb glued in.
ajooter, the sapwood is off, what you see is a linen strip.
Going to work on the right limb now.
Thanks
Logged
" To be, or not to be"...decisions, decisions, decisions.
Pages: [1]
« previous next »