Author Topic: Brace Hieght  (Read 4676 times)

0 Members and 1 Guest are viewing this topic.

whatareyadoin

  • Guest
Brace Hieght
« on: December 19, 2007, 02:39:35 pm »
If my Bow Is 68" Long nok to nok then brace hieght should be ? I have it at 6 Now after I made a string with the string jig Dont want to stress it to much, But.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Brace Hieght
« Reply #1 on: December 19, 2007, 02:44:57 pm »
About 5 1/2" -6" is where mine usually wind up. I use a fistmele to start, then fine tune it until the arrows fly right.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: Brace Hieght
« Reply #2 on: December 19, 2007, 02:47:16 pm »
I think the 6" should be ok. Your braced profile looks great can we get a full draw pic. Danny
"You know a tree by the fruit it bears"   God

Offline 1/2primitive

  • Member
  • Posts: 1,026
  • Bible believing Christian
Re: Brace Hieght
« Reply #3 on: December 19, 2007, 07:33:31 pm »
That should be just fine. I usually brace my bows lower, around 5", but it's up to you.
    Sean
Dallas/Fort Worth Tx.

Offline Strongbow88

  • Member
  • Posts: 91
Re: Brace Hieght
« Reply #4 on: December 19, 2007, 08:36:38 pm »
How do you brace your bow so low without the feathers touching the arrow rest. Mines at 6'' and that is bearly enough for 5'' inch feathers
                       
Danny Johnson

Offline tom sawyer

  • Member
  • Posts: 1,466
Re: Brace Hieght
« Reply #5 on: December 19, 2007, 09:04:14 pm »
I usually brace upwards of 6", but just enough to get clearance of feathers as was said.  I also use a single loop string and a timber hitch so I can adjust it to get just the right brace.  I've had enough of re-doing my second loop to make a significant length adjustment.  Maybe if I was using a jig I could hit the mark better.

I do try and keep my feathers as far to the back of the arrow as possible, my fingers aren't huge so I can usually put them about 1/2" forward of the nock and have enough room.  I made my last feathers around 4 3/4" long.
Lennie
Hannibal, MO

whatareyadoin

  • Guest
Re: Brace Hieght
« Reply #6 on: December 19, 2007, 10:36:04 pm »
I made a non flemish string with a string Jig a friend gave me, Just to see how the bow performed I still need more range to check for Paradox. So far so good.
Her is the Full Draw at 6 " Brace.X bow No cut out.

[attachment deleted by admin]
« Last Edit: December 19, 2007, 10:38:12 pm by whatareyadoin »

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Brace Hieght
« Reply #7 on: December 19, 2007, 10:55:45 pm »
I assume you are measuring string to belly of bow. The best brace height is the lowest one at which you get good arrow flight. I start at fletch clearing distance and adjust from there. See Selfbow care and Tuning.
http://mysite.verizon.net/georgeandjoni/archer.html
Jawge
Set Happens!
If you ain't breakin' you ain't makin!

whatareyadoin

  • Guest
Re: Brace Hieght
« Reply #8 on: December 19, 2007, 11:08:02 pm »
I assume you are measuring string to belly of bow. The best brace height is the lowest one at which you get good arrow flight. I start at fletch clearing distance and adjust from there. See Selfbow care and Tuning.
http://mysite.verizon.net/georgeandjoni/archer.html
Jawge
Back of the grip

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 31,913
  • if you have to ask you wouldn't understand ,Tenn.
Re: Brace Hieght
« Reply #9 on: December 20, 2007, 05:41:12 am »
Most of mine are 5 1/2 to 6,little more or a little less depending on how it shoots.
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: Brace Hieght
« Reply #10 on: December 20, 2007, 05:50:23 pm »
Whatareyadoin, Nice full draw pic. Well done laddie. Danny
"You know a tree by the fruit it bears"   God

whatareyadoin

  • Guest
Re: Brace Hieght
« Reply #11 on: December 20, 2007, 11:43:02 pm »
Thank you all. I'm working on the arrows Now my first build along tell  me if it sucks never did a build along before.