« previous next »
Pages: [1]

Author Topic: How to make squirrel tail silencers?  (Read 5532 times)

0 Members and 1 Guest are viewing this topic.

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
How to make squirrel tail silencers?
« on: February 03, 2014, 06:00:11 pm »
How does one go about making a squirrel tail string silencer?
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline TRACY

  • Member
  • Posts: 4,523
Re: How to make squirrel tail silencers?
« Reply #1 on: February 05, 2014, 08:59:43 am »
Might have better luck using the hide from neck to tail along the back and tanning it. Either way, some type of hide curing will be involved for the silencer to last abuse of the string. Good luck


Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: How to make squirrel tail silencers?
« Reply #2 on: February 05, 2014, 01:57:51 pm »
Someone on here posted two bows with squirrel tail silencers.
They look awesome.
Hence, I want some on my newest ERC bow.
Logged
"Insanity is doing the same thing over and over again and expecting different results"

Offline finefirewood

  • Member
  • Posts: 43
Re: How to make squirrel tail silencers?
« Reply #3 on: February 10, 2014, 09:17:03 pm »
I just did this on a bow for my brother. Check the bow section for some pics. I've seen others split the tail and use half on the top and the other on the bottom, but I couldn't split a tail for the life of me! So, I just used full tails on each end. The way I did it was separate the twist a bit and insert the base end and pull through to the tip, then wrap the tail tightly around the string until there is about two inches left and stick it through the string again. Repeat on the other limb with another tail. You may have to twist the string again a little bit to snug it up, but once the bow is braced, it will secure the tails nice and tight. They work great. Let them dry and harden and trim the bases of the tails close to  the string and you'll be good to go!

FF
« Last Edit: February 11, 2014, 08:18:15 am by finefirewood »
Logged
Making ordinary wood into fine firewood one stick at a time!

Offline finefirewood

  • Member
  • Posts: 43
Re: How to make squirrel tail silencers?
« Reply #4 on: February 10, 2014, 09:21:33 pm »
http://www.primitivearcher.com/smf/index.php/topic,44951.0.html

Here's the link to my bow. Let me know if you need any more information.

FF
Logged
Making ordinary wood into fine firewood one stick at a time!
Pages: [1]
« previous next »