« previous next »
Pages: [1]

Author Topic: making a redoak warbow  (Read 3431 times)

0 Members and 1 Guest are viewing this topic.

Offline fisher2

  • Member
  • Posts: 48
making a redoak warbow
« on: May 16, 2013, 11:02:53 am »
i found at the local home depot a railing or something shaped like a U and i was thinking if i back it with something how heavy could i get it? could i back oak with oak ? as they already have thin sheets 1/4" thick or so i could use as a backing but could i break 100#@28" safely? i'd prefer 110#
Logged

Offline DarkSoul

  • Member
  • Posts: 1,315
    • Orion Bows
Re: making a redoak warbow
« Reply #1 on: May 16, 2013, 06:32:10 pm »
I'm having a hard time understanding anything you said.  ??? Could you please explain things more elaborately?

Of course you can back oak with oak. That is basically an oak selfbow... However, an oak stave will always be stronger than an oak (even if backed with oak) board.
A draw weight in excess of 100# is doable, but will need an 'overbuilt' design with red oak.
Logged
"Sonuit contento nervus ab arcu."
Ovid, Metamorphoses VI-286

Offline Thesquirrelslinger

  • Member
  • Posts: 1,245
Re: making a redoak warbow
« Reply #2 on: May 16, 2013, 08:46:12 pm »
Toast the belly good BEFORE you glue.
you might want a SLIGHTLY rounded belly. Also make it wide... 2 inches or so.
Make it long with narrow tips.
Logged
"Insanity is doing the same thing over and over again and expecting different results"
Pages: [1]
« previous next »