Author Topic: Cherry bark back question  (Read 1677 times)

0 Members and 1 Guest are viewing this topic.

Offline Boudreaux

  • Member
  • Posts: 29
Cherry bark back question
« on: July 31, 2012, 10:39:44 pm »
I have harvest some cherry bark to back my most resent bow with. My question is I hear people talk about the join so they bevel edges to they are flush. My bark is as thin as paper. Do i need to worry about this? It will take 3 pieces to do one limb.

Thanks
Boswell

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Cherry bark back question
« Reply #1 on: August 01, 2012, 12:11:55 am »
I just did a simple bevel cut across the ends by hand with a sharp razor knife. It only took a second and the overlap was quite smooth.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC